Most Speed Queen washer repairs in Washington involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Speed Queen and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Speed Queen. Listed companies are independent technicians who repair Speed Queen washers and other brands.
Who Works on Speed Queen Washers Near Washington
We found 9 appliance repair companies within 60 miles of Washington. 1 of them are based in Washington itself, and the rest are spread across St. George (4), Cedar City (2), and Hurricane (1). Distances run up to about 47 miles. None of the repair companies near Washington name Speed Queen in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is JJ Service and Repair, about 0.7 miles away. The 8 rated companies in range average 4.4 stars. Washington is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 4 |
|---|---|
| Name washers or washing machines in their listing | 2 |
| Companies within 60 miles | 9 |
| With 4.5+ stars and at least 10 reviews | 3 |
| Three nearest companies, miles away | 0.7, 3.3, 3.8 |
| Mention Speed Queen | 0 |
At the top of the Washington list: Mr. Appliance of St. George (6.0 miles away, based in St. George, 4.8 stars from 1,430 reviews, lists Saturday hours); Sears Appliance Repair (3.3 miles away, based in St. George, 4.1 stars from 249 reviews, lists Saturday hours); JJ Service and Repair (0.7 miles away, 4.9 stars from 107 reviews); St George Appliance Repair (3.8 miles away, based in St. George, 4.0 stars from 95 reviews, lists Saturday hours).
Speed Queen sells top-load agitator, front-load, stacked, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Speed Queen Washer Lines Technicians Work On
What a Speed Queen Washer Technician Deals With
The TC5 drives its agitator through a transmission, giving a 210-degree agitation stroke for a more aggressive wash. Source: Speed Queen - Speed Queen's TC5 brings a classic wash back to your laundry
The TC5 has no lid lock, which sets it apart in the Speed Queen top-load lineup. Source: Speed Queen - Consumer Product Catalog
What Speed Queen Says to Check First
- Washer leaking. Speed Queen says to make sure the fill hoses are connected properly, check their condition, and look for a clogged drain. Source: Speed Queen - Quick Start Guide, Topload Washer
- Washer won't start / controls not responding. Speed Queen says to confirm Control Lock is off, which is turned off by pressing and holding the Signal key for three seconds. Source: Speed Queen - Quick Start Guide, Topload Washer
Signs Your Speed Queen Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Water on the floor under or in front of the washer
- Washer will not spin, or clothes come out soaking wet
Inside a Washer Repair Visit
Care Speed Queen Recommends for Its Washers
- Clean the filter screens in the fill hoses about every six months. Source: Speed Queen - Quick Start Guide, Topload Washer
- Replace the fill hoses and have a qualified technician do preventive maintenance about every five years. Source: Speed Queen - Quick Start Guide, Topload Washer
Speed Queen Washer Repair Cost Ranges
A Speed Queen washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Speed Queen Washer Call
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Washington Owners Should Know
Most washer calls in Washington come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Washington Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What guarantee do you give on parts and labor?
Speed Queen Washer Repair FAQs: Washington, UT
What stops a washer from spinning?
How do I find a technician who knows Speed Queen washers?
Why does my Speed Queen washer show an error code?
Where is the water under my washer coming from?
Related Repair Pages for Washington
More Speed Queen Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Speed Queen repair.