Most Samsung washer repairs in Washington involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Washington, with those that mention Samsung first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Samsung, and the technicians listed are independent repair companies, not the manufacturer.
Independent Samsung Washer Technicians, Washington UT
Within 60 miles of Washington there are 9 appliance repair companies in our data. 1 of them are based in Washington itself, and the rest are spread across St. George (4), Cedar City (2), and Hurricane (1). Distances run up to about 47 miles. The closest is JJ Service and Repair, about 0.7 miles away. None of the repair companies near Washington name Samsung in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 8 rated companies in range average 4.4 stars. Washington is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Washington. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Listing Saturday hours | 4 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 3 |
| Name washers or washing machines in their listing | 2 |
| Distance to the three closest (mi) | 0.7, 3.3, 3.8 |
| Companies within 60 miles | 9 |
| Mention Samsung | 0 |
Closest matches for Washington: Mr. Appliance of St. George (6.0 miles away, based in St. George, 4.8 stars from 1,430 reviews, lists Saturday hours); JJ Service and Repair (0.7 miles away, 4.9 stars from 107 reviews); Sears Appliance Repair (3.3 miles away, based in St. George, 4.1 stars from 249 reviews, lists Saturday hours); Appliance Repair Center (11.1 miles away, based in Hurricane, 4.9 stars from 74 reviews, lists Saturday hours).
Samsung sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Samsung Washer Lines and Features
What a Samsung Washer Technician Deals With
Samsung top loaders are leveled by checking that the pulsator sits centered under a shallow fill of water, while front loaders are leveled by rocking the cabinet and adjusting the feet. Source: Samsung US Support - Washer installation and calibration
What Samsung Says to Check First
- Washer won't start. Samsung says to confirm the washer is plugged into a grounded outlet on its own dedicated circuit without a surge protector, check the cord and look for a tripped breaker. Source: Samsung US Support - Samsung washer power issues
- Washer not draining. Samsung says to turn the washer off, confirm it is level and the drain hose is installed correctly, then clean the pump filter on front load models. Source: Samsung US Support - Samsung washer won't drain
Samsung Washer Error Codes
| Code | What it means |
|---|---|
| dC / dE / dS / dL / FL | Door error: the door is not detected as closed and locked (on some models dC can also flag an unbalanced load). Source: Samsung US Support - Samsung washing machine information and error codes |
| OE / OC / 0E / 0C | Overflow: too much water in the tub. Source: Samsung US Support - Samsung washing machine information and error codes |
| bE | Motor speed sensor error (bE2 on some models means a stuck button instead). Source: Samsung US Support - Samsung washing machine information and error codes |
Full list: Samsung Washer Error Codes Explained: 4C and More.
Samsung Smart Care has the washer show a diagnostic code that the owner scans with a phone camera or enters in Samsung's app, which explains the code and suggests next steps. Source: Samsung US Support - Use Smart Care on your Samsung washer and dryer
Samsung Washer Problems Worth a Service Call
- Washer will not spin, or clothes come out soaking wet
- Washer fills slowly, will not fill, or keeps filling
- Water on the floor under or in front of the washer
How a Washer Service Call Usually Goes in Washington
Owner Care for Samsung Washers
- Use the least HE detergent that gets clothes clean and never fill past the MAX line in the dispenser. Source: Samsung US Support - Detergent usage
- Clean the front load pump filter at least monthly or about every 40 washes, whichever comes first. Source: Samsung US Support - How to clean your Samsung washer
Brand guides: Samsung Washer Not Spinning, Draining or Unlocking.
Samsung Washer Repair Cost Ranges
Most Samsung washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Washington
Most washer calls in Washington come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Washington
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
Samsung Washer Repair FAQs: Washington, UT
Which Washington technicians work on Samsung?
Where is the water under my washer coming from?
What stops a washer from spinning?
More Washing Machine Repair in Washington, UT
More Samsung Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Samsung repair.