Most Samsung washer repairs in Bloomington involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Bloomington, with those that mention Samsung first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Samsung, and the technicians listed are independent repair companies, not the manufacturer.
Independent Samsung Washer Technicians, Bloomington MN
Within 30 miles of Bloomington there are 40 appliance repair companies in our data. 4 list an address in Bloomington, and the rest are spread across Minneapolis (9), Eden Prairie (5), and Hopkins (5). The farthest listed company is about 12 miles out. No company within 90 miles of Bloomington mentions Samsung by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Advanced Appliance Repair Bloomington., around 1.4 miles out. Rated companies nearby average 4.4 stars across 29 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 46 |
|---|---|
| Repair companies inside 30 miles | 60 |
| Distance to the three closest (mi) | 1.4, 1.4, 1.6 |
| Rated 4.5 stars or higher (10+ reviews) | 22 |
| Mention Samsung | 0 |
| Mention washer work | 10 |
First up for Bloomington: Appliance Repair Pro (6.1 miles away, based in Savage, 5.0 stars from 500 reviews, lists Saturday hours); AMA Appliance Service (8.4 miles away, based in Hopkins, 5.0 stars from 82 reviews); Omega Force Appliance Repair (11.7 miles away, based in St Paul, 4.9 stars from 678 reviews, lists Saturday hours); Sears Appliance Repair (5.6 miles away, based in Eden Prairie, 4.5 stars from 124 reviews, lists Saturday hours).
Samsung sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Samsung Washer
How Samsung Washers Are Built
Samsung washers have a Calibration mode that resets weight detection and water-per-cycle settings, recommended after installation or adjustments and as a spin test with an empty drum. Source: Samsung US Support - Washer installation and calibration
Samsung Washer Symptoms and First Checks
- Off balance, shaking. For UE/Ub unbalance codes, Samsung says to spread the laundry out, close the door and restart, and to follow the won't-spin steps if it keeps happening. Source: Samsung US Support - Samsung washing machine information and error codes
- Washer leaking. Samsung says to check the water supply hoses, their connections and o-rings first, then look for hair or debris in the door gasket and make sure the door closes fully. Source: Samsung US Support - Fix a leak in your Samsung washer
Reading a Samsung Washer Error Code
| Code | What it means |
|---|---|
| UE / Ub | The load is unbalanced; redistribute it and restart. Source: Samsung US Support - Samsung washing machine information and error codes |
| bE | Motor speed sensor error (bE2 on some models means a stuck button instead). Source: Samsung US Support - Samsung washing machine information and error codes |
| Sud / Sd | Too many suds; the washer pauses to let them settle, and Samsung says this alone does not mean service is needed. Source: Samsung US Support - Samsung washing machine information and error codes |
Full list: Samsung Washer Error Codes Explained: 4C and More.
Samsung Smart Care has the washer show a diagnostic code that the owner scans with a phone camera or enters in Samsung's app, which explains the code and suggests next steps. Source: Samsung US Support - Use Smart Care on your Samsung washer and dryer
When to Call for Samsung Washer Repair
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
- Water left in the drum after the cycle
Inside a Washer Repair Visit
Keeping a Samsung Washer Running
- Leave the door (or lid) and the detergent drawer open between uses so the washer can air out and resist mold and mildew. Source: Samsung US Support - How to clean your Samsung washer
- Use the least HE detergent that gets clothes clean and never fill past the MAX line in the dispenser. Source: Samsung US Support - Detergent usage
Brand guides: Samsung Washer Not Spinning, Draining or Unlocking.
What Samsung Washer Repairs Cost
Most Samsung washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Bloomington Owners Should Know
Most washer calls in Bloomington come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Before You Book in Bloomington
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on front-load and top-load washers, or only one type?
- If the washer is leaking, will you find where the water starts before quoting a part?
Samsung Washer Repair FAQs: Bloomington, MN
Is this Samsung customer service?
What should I do about a Samsung error code?
Why does my front-load washer smell?
Related Repair Pages for Bloomington
Samsung Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Samsung washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.