Most Maytag washer repairs in Hartford involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Hartford list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Who Works on Maytag Washers Near Hartford
We found 40 appliance repair companies within 30 miles of Hartford. 1 of them are based in Hartford itself, and the rest are spread across Wauwatosa (5), Milwaukee (3), and Brookfield (3). The farthest listed company is about 27 miles out. No company within 30 miles of Hartford names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. The closest is Bergmann's Appliance TV & Bedding, about 4.9 miles away. The 37 rated companies in range average 3.7 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 21 |
|---|---|
| Three nearest companies, miles away | 4.9, 5.0, 5.0 |
| Mention Maytag | 0 |
| Appliance repair companies in range (30 mi) | 49 |
| Rated 4.5 stars or higher (10+ reviews) | 10 |
| Mention washer work | 10 |
First up for Hartford: Classic Maytag/Appliance Service Professionals (84.0 miles away, based in Green Bay, 4.7 stars from 62 reviews, lists Saturday hours); Maytag Appliance Repair (84.9 miles away, based in Wheeling, 3.0 stars from 6 reviews, lists Saturday hours); Lake Country Appliance Repair (18.1 miles away, based in Pewaukee, 4.6 stars from 155 reviews); Sixth Sense Service, LLC (24.9 miles away, based in Wauwatosa, 4.7 stars from 50 reviews).
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- An error code on the display
- Water left in the drum after the cycle
- Washer fills slowly, will not fill, or keeps filling
What Gets Fixed on a Hartford Washer Call
Care Maytag Recommends for Its Washers
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Around Hartford
Most washer calls in Hartford come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin
In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.
Questions to Ask a Hartford Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Hartford, WI
Why is my washer leaking?
Which Hartford technicians work on Maytag?
Why won't my washer spin?
Is my Maytag washer worth repairing?
Other Washer Repair in Hartford
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Hartford technician bring the right parts.