Most Maytag washer repairs in Green Bay involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Green Bay
Within 30 miles of Green Bay there are 25 appliance repair companies in our data. 11 of them are based in Green Bay itself, and other nearby bases include Appleton (7), De Pere (3), and Ashwaubenon (1). Distances run up to about 30 miles. Of those, 1 mentions Maytag by name. Nearest on the list: Westbrook Appliance Repair Professionals, around 0.9 miles out. Across 23 rated companies, the average public rating is 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Maytag | 1 |
|---|---|
| Mention washer work | 5 |
| Rated 4.5 stars or higher (10+ reviews) | 4 |
| Open on Saturdays (per listing) | 10 |
| Companies within 30 miles | 25 |
| Distance to the three closest (mi) | 0.9, 1.1, 1.3 |
Closest matches for Green Bay: Classic Maytag/Appliance Service Professionals (3.9 miles away, 4.7 stars from 62 reviews, lists Saturday hours); Mr. Appliance of Green Bay (6.2 miles away, based in De Pere, 4.8 stars from 428 reviews, lists Saturday hours); Mr. Appliance of Appleton (17.8 miles away, based in Kaukauna, 4.9 stars from 56 reviews, lists Saturday hours); Sears Appliance Repair (3.7 miles away, 3.9 stars from 38 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines and Features
What Makes Maytag Washer Repairs Different
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
Maytag Washer Symptoms and First Checks
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Washer fills slowly, will not fill, or keeps filling
- Water left in the drum after the cycle
- Musty or mildew smell from the drum or door seal
How a Washer Service Call Usually Goes in Green Bay
Care Maytag Recommends for Its Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Green Bay Owners Should Know
Most washer calls in Green Bay come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin
In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.
How to Choose a Washing Machine Technician Near Green Bay
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Green Bay, WI
Where is the water under my washer coming from?
How do I find a technician who knows Maytag washers?
Is this Maytag customer service?
How do I get rid of a washer mildew smell?
More Washing Machine Repair in Green Bay, WI
Maytag Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.