If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Tumwater, with those that mention Maytag first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Maytag Washer Repair Near Tumwater
Our data shows 27 appliance repair companies inside a 30-mile radius of Tumwater. Other nearby bases include Tacoma (10), Lacey (3), and Spanaway (3). Distances run up to about 30 miles. The closest is 1st Choice Appliances, about 4.5 miles away. No company within 90 miles of Tumwater mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 21 rated companies, the average public rating is 4.4 stars.
Companies are shown by relevance and distance from Tumwater. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 27 |
|---|---|
| Name washers or washing machines in their listing | 8 |
| Open on Saturdays (per listing) | 13 |
| Mention Maytag | 0 |
| Distance to the three closest (mi) | 4.5, 4.7, 5.4 |
| Rated 4.5 stars or higher (10+ reviews) | 6 |
The leading options for Tumwater are RPS Appliance Repair (29.6 miles away, based in Graham, 4.9 stars from 495 reviews); Sears Appliance Repair (5.4 miles away, based in Lacey, 4.4 stars from 262 reviews, lists Saturday hours); Sears Appliance Repair (23.9 miles away, based in Spanaway, 4.5 stars from 111 reviews, lists Saturday hours); Leon's Luxury repair & installation (27.9 miles away, based in Tacoma, 4.7 stars from 51 reviews).
Maytag Washer Lines and Features
What Makes Maytag Washer Repairs Different
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Maytag Washer Symptoms and First Checks
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
When to Call for Maytag Washer Repair
- Loud banging, shaking or walking during the spin
- Grinding or roaring noise that rises with spin speed
- Burning smell or a motor that hums without turning
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Local Notes for Tumwater
Most washer calls in Tumwater come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Questions to Ask a Tumwater Washer Technician
- What guarantee do you give on parts and labor?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Maytag Washer Repair FAQs: Tumwater, WA
What should I do about a Maytag error code?
Why is my washer leaking?
Do you work for Maytag?
What stops a washer from spinning?
More Washing Machine Repair in Tumwater, WA
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.