A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Monroe, with those that mention Maytag first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Who Works on Maytag Washers Near Monroe
We found 40 appliance repair companies within 30 miles of Monroe. 1 of them are based in Monroe itself, and the rest are spread across Everett (12), Bothell (8), and Woodinville (5). The farthest listed company is about 13 miles out. SEATTLE HVAC & Appliance Repair Guys is the nearest, roughly 0.9 miles from Monroe. No company within 90 miles of Monroe mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.8 stars across 33 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| Mention Maytag | 0 |
| Listing Saturday hours | 44 |
| Mention washer work | 12 |
| With 4.5+ stars and at least 10 reviews | 23 |
| Distance to the three closest (mi) | 0.9, 3.2, 6.2 |
The leading options for Monroe are HotWire Furnace, Air Conditioning & Appliance Repair Bothell (13.0 miles away, based in Bothell, 4.9 stars from 1,493 reviews, lists Saturday hours); Appliance Mechanics (11.1 miles away, based in Lake Stevens, 4.9 stars from 445 reviews); Smartfix Appliance (10.2 miles away, based in Lake Stevens, 5.0 stars from 102 reviews, lists Saturday hours); GreenFix Appliance Repair LLC (13.3 miles away, based in Redmond, 5.0 stars from 141 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines and Features
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Maytag Washer Symptoms and First Checks
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Maytag Washer Problems Worth a Service Call
- Washer will not start or the lid or door stays locked
- An error code on the display
- Washer will not spin, or clothes come out soaking wet
How a Washer Service Call Usually Goes in Monroe
Care Maytag Recommends for Its Washers
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
What Monroe Owners Should Know
Most washer calls in Monroe come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Monroe
- Do you work on front-load and top-load washers, or only one type?
- What guarantee do you give on parts and labor?
- If a part has to be ordered, how soon can you come back to finish?
Maytag Washer Repair FAQs: Monroe, WA
Do you work for Maytag?
What stops a washer from spinning?
Why does my Maytag washer show an error code?
Related Repair Pages for Monroe
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Monroe technician bring the right parts.