Most Maytag washer repairs in Des Moines involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Des Moines
Our data shows 40 appliance repair companies inside a 30-mile radius of Des Moines. 1 list an address in Des Moines, and the rest are spread across Kent (13), Auburn (9), and Tukwila (3). Distances run up to about 8 miles. No company within 90 miles of Des Moines mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: SmartFix Hub Co., around 2.7 miles out. The 31 rated companies in range average 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 2.7, 3.0, 3.0 |
|---|---|
| Open on Saturdays (per listing) | 35 |
| Appliance repair companies in range (30 mi) | 60 |
| Mention washer work | 9 |
| Rated 4.5 stars or higher (10+ reviews) | 21 |
| Mention Maytag | 0 |
First up for Des Moines: Expert Appliance Repair (7.6 miles away, based in Seattle, 5.0 stars from 1,139 reviews); Appliances Repair Solutions (7.1 miles away, based in Auburn, 4.9 stars from 62 reviews, lists Saturday hours); HotWire Furnace, Air Conditioning & Appliance Repair Tacoma (7.5 miles away, based in Tacoma, 4.9 stars from 470 reviews, lists Saturday hours); A&H Appliance and Home services (7.2 miles away, based in Federal Way, 4.9 stars from 35 reviews, lists Saturday hours).
Know Your Maytag Washer
How Maytag Washers Are Built
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
Maytag Washer Symptoms and First Checks
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Water on the floor under or in front of the washer
- Grinding or roaring noise that rises with spin speed
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
Around Des Moines
Most washer calls in Des Moines come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Questions to Ask a Des Moines Washer Technician
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
Maytag Washer Repair FAQs: Des Moines, WA
How do I get rid of a washer mildew smell?
Why won't my washer spin?
Why is my washer leaking?
Is this Maytag customer service?
More Washing Machine Repair in Des Moines, WA
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.