Maytag owners in Clarkston usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Clarkston
Our data shows 11 appliance repair companies inside a 60-mile radius of Clarkston. 2 list an address in Clarkston, and other nearby bases include Lewiston (7), Des Moines (1), and Moscow (1). Nearest on the list: Mel's Appliance Services, around 0.5 miles out. None of the companies within 60 miles mention Maytag by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.4 stars across 10 businesses. Clarkston is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Clarkston. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 4 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 4 |
| Companies within 60 miles | 11 |
| Listing Saturday hours | 5 |
| Distance to the three closest (mi) | 0.5, 1.3, 2.3 |
| Mention Maytag | 0 |
First up for Clarkston: Genuine Maytag Repair (89.6 miles away, based in Spokane, 4.0 stars from 5 reviews, lists Saturday hours); Sears Appliance Repair (2.6 miles away, based in Lewiston, 4.4 stars from 39 reviews, lists Saturday hours); CM Appliance Repair (5.8 miles away, based in Lewiston, 4.8 stars from 112 reviews); Lewiston MW & Appliance; (3.4 miles away, based in Lewiston, 5.0 stars from 20 reviews).
Know Your Maytag Washer
What Makes Maytag Washer Repairs Different
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Common Maytag Washer Problems
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Clarkston
Most washer calls in Clarkston come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Questions to Ask a Clarkston Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair Maytag washers, and how quickly can you get parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
Maytag Washer Repair FAQs: Clarkston, WA
How do I get rid of a washer mildew smell?
Why won't my washer spin?
Is my Maytag washer worth repairing?
Other Washer Repair in Clarkston
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Clarkston technician bring the right parts.