Most Maytag washer repairs in Onalaska involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Onalaska, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Onalaska
We found 40 appliance repair companies within 60 miles of Onalaska. Other nearby bases include Conroe (11), Spring (5), and Lufkin (4). Ace Repair Services is the nearest, roughly 12.4 miles from Onalaska. No company within 60 miles of Onalaska names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.6 stars across 36 businesses. Onalaska is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Onalaska. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Rated 4.5 stars or higher (10+ reviews) | 33 |
|---|---|
| Three nearest companies, miles away | 12.4, 12.9, 20.2 |
| Repair companies inside 60 miles | 60 |
| Mention washer work | 17 |
| Open on Saturdays (per listing) | 35 |
| Mention Maytag | 0 |
First up for Onalaska: AAA Maytag Home Appliance (83.5 miles away, based in Houston, 4.4 stars from 13 reviews, lists Saturday hours); Sears Appliance Repair (12.9 miles away, based in Livingston, 4.7 stars from 219 reviews, lists Saturday hours); PowerOn Appliance Repair Service (50.5 miles away, based in The Woodlands, 4.9 stars from 1,507 reviews, lists Saturday hours); Sears Appliance Repair (41.0 miles away, based in Conroe, 4.6 stars from 382 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
When to Call for Maytag Washer Repair
- An error code on the display
- Washer fills slowly, will not fill, or keeps filling
- Washer will not spin, or clothes come out soaking wet
What Gets Fixed on a Onalaska Washer Call
Owner Care for Maytag Washers
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
Local Notes for Onalaska
Most washer calls in Onalaska come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Onalaska
- Do you work on front-load and top-load washers, or only one type?
- If the washer is leaking, will you find where the water starts before quoting a part?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Onalaska, TX
Do you work for Maytag?
Which Onalaska technicians work on Maytag?
Why is my washer leaking?
Why won't my washer spin?
Other Washer Repair in Onalaska
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Onalaska technician bring the right parts.