If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Willis list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Independent Maytag Washer Technicians, Willis TX
40 repair companies serve Willis from within 30 miles. 3 list an address in Willis, and other nearby bases include Conroe (11), Spring (8), and Magnolia (7). None of the companies within 30 miles mention Maytag by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Lone Star Appliance Repair LLC is the nearest, roughly 0.6 miles from Willis. Rated companies nearby average 4.7 stars across 34 businesses.
Companies are shown by relevance and distance from Willis. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 15 |
|---|---|
| Mention Maytag | 0 |
| With 4.5+ stars and at least 10 reviews | 25 |
| Three nearest companies, miles away | 0.6, 0.7, 5.7 |
| Repair companies inside 30 miles | 49 |
| Open on Saturdays (per listing) | 30 |
The leading options for Willis are AAA Maytag Home Appliance (52.6 miles away, based in Houston, 4.4 stars from 13 reviews, lists Saturday hours); PowerOn Appliance Repair Service (19.0 miles away, based in The Woodlands, 4.9 stars from 1,507 reviews, lists Saturday hours); Sears Appliance Repair (8.0 miles away, based in Conroe, 4.6 stars from 382 reviews, lists Saturday hours); GIR Appliance repair (19.0 miles away, based in The Woodlands, 4.9 stars from 267 reviews).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
When to Call for Maytag Washer Repair
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Owner Care for Maytag Washers
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
Laundry Notes for Willis, TX
Most washer calls in Willis come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Willis
- If a part has to be ordered, how soon can you come back to finish?
- Is your company licensed where my state requires it, and insured?
- Will you check the drain pump filter and drain hose before replacing the pump?
Maytag Washer Repair FAQs: Willis, TX
What stops a washer from spinning?
Should I repair or replace my Maytag washer?
Do you work for Maytag?
Other Washer Repair in Willis
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.