If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Muleshoe, with those that mention Maytag first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Maytag Washer Repair Near Muleshoe
7 repair companies serve Muleshoe from within 60 miles. 1 of them are based in Muleshoe itself, and the rest are spread across Clovis (4) and Plainview (2). The closest is J1Sev3n Services, LLC, about 1.0 miles away. No company within 90 miles of Muleshoe mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.6 stars across 7 businesses. Muleshoe is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Maytag | 0 |
|---|---|
| Name washers or washing machines in their listing | 2 |
| With 4.5+ stars and at least 10 reviews | 5 |
| Open on Saturdays (per listing) | 2 |
| Distance to the three closest (mi) | 1.0, 29.4, 29.5 |
| Repair companies inside 60 miles | 7 |
Closest matches for Muleshoe: Sears Appliance Repair (29.5 miles away, based in Clovis, 4.6 stars from 69 reviews, lists Saturday hours); J1Sev3n Services, LLC (1.0 miles away, 5.0 stars from 29 reviews); Sears Appliance Repair (57.6 miles away, based in Plainview, 4.6 stars from 72 reviews, lists Saturday hours); AAA Appliance Service (29.4 miles away, based in Clovis, 4.8 stars from 50 reviews).
Know Your Maytag Washer
What Makes Maytag Washer Repairs Different
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Maytag Washer Symptoms and First Checks
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Washer fills slowly, will not fill, or keeps filling
- An error code on the display
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Muleshoe Owners Should Know
Most washer calls in Muleshoe come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Before You Book in Muleshoe
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Muleshoe, TX
What should I do about a Maytag error code?
Do you work for Maytag?
Why is my washer leaking?
How do I find a technician who knows Maytag washers?
More Washing Machine Repair in Muleshoe, TX
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.