Maytag Washer Repair in Portales, NM

If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Portales, with those that mention Maytag first, then the nearest appliance repair companies.

This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.

Who Works on Maytag Washers Near Portales

Our data shows 5 appliance repair companies inside a 60-mile radius of Portales. Other nearby bases include Clovis (4) and Muleshoe (1). The farthest listed company is about 37 miles out. Nearest on the list: AAA Appliance Service, around 18.4 miles out. No company within 90 miles of Portales mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.6 stars across 5 businesses. Portales is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

At the top of the Portales list: Sears Appliance Repair (18.6 miles away, based in Clovis, 4.6 stars from 69 reviews, lists Saturday hours); AAA Appliance Service (18.4 miles away, based in Clovis, 4.8 stars from 50 reviews); Those Guys Appliance Repair (18.7 miles away, based in Clovis, 4.1 stars from 13 reviews); J1Sev3n Services, LLC (37.0 miles away, based in Muleshoe, 5.0 stars from 29 reviews).

Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.

Maytag Washer Lines Technicians Work On

How Maytag Washers Are Built

Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer

Common Maytag Washer Problems

• Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
• Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling

Reading a Maytag Washer Error Code

Maytag Washer Problems Worth a Service Call

• Washer fills slowly, will not fill, or keeps filling
• Water on the floor under or in front of the washer
• Grinding or roaring noise that rises with spin speed

How a Washer Service Call Usually Goes in Portales

Keeping a Maytag Washer Running

• Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
• On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal

Brand guides: Maytag Washer Not Draining or Spinning: Causes.

What Maytag Washer Repairs Cost

A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:

• Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
• Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
• Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
• Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
• Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
• After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Getting Ready for the Repair

• Where the washer drains (standpipe or laundry sink)
• The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
• Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller

Local Notes for Portales

Most washer calls in Portales come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Hiring a Washer Repair Company in Portales

• Do you work on front-load and top-load washers, or only one type?
• Can you give a written estimate before ordering parts?
• If the washer is leaking, will you find where the water starts before quoting a part?

Maytag Washer Repair FAQs: Portales, NM

Related Repair Pages for Portales

More Maytag Washer Repair Pages Nearby

Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.