If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Jasper, with those that mention Maytag first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Independent Maytag Washer Technicians, Jasper TX
24 repair companies serve Jasper from within 60 miles. 3 of them are based in Jasper itself, and the rest are spread across Beaumont (6), Lufkin (4), and DeRidder (2). Distances run up to about 60 miles. The closest is A1 Refrigeration and Air Conditioning, about 0.5 miles away. No company within 90 miles of Jasper mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 23 rated companies, the average public rating is 4.2 stars. Jasper is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 0.5, 0.5, 2.0 |
|---|---|
| Open on Saturdays (per listing) | 18 |
| With 4.5+ stars and at least 10 reviews | 10 |
| Repair companies inside 60 miles | 24 |
| Mention Maytag | 0 |
| Name washers or washing machines in their listing | 8 |
At the top of the Jasper list: Sears Appliance Repair (2.0 miles away, 4.6 stars from 103 reviews, lists Saturday hours); Mr. Appliance of Beaumont (59.9 miles away, based in Beaumont, 4.9 stars from 343 reviews, lists Saturday hours); A1 Star Appliance Repair (58.6 miles away, based in Beaumont, 4.8 stars from 154 reviews, lists Saturday hours); Sears Appliance Repair (46.0 miles away, based in Leesville, 4.6 stars from 54 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
Signs Your Maytag Washer Needs a Technician
- An error code on the display
- Burning smell or a motor that hums without turning
- Water left in the drum after the cycle
Inside a Washer Repair Visit
Owner Care for Maytag Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
Local Notes for Jasper
Most washer calls in Jasper come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Before You Book in Jasper
- Is your company licensed where my state requires it, and insured?
- Do you work on front-load and top-load washers, or only one type?
- If a part has to be ordered, how soon can you come back to finish?
Maytag Washer Repair FAQs: Jasper, TX
What stops a washer from spinning?
Do you work for Maytag?
Why is my washer leaking?
Is my Maytag washer worth repairing?
Other Washer Repair in Jasper
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.