A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Maytag Washer Repair Near Irving
40 repair companies serve Irving from within 30 miles. 12 list an address in Irving, and other nearby bases include Dallas (5), Carrollton (4), and Grand Prairie (4). The farthest listed company is about 9 miles out. Harborview Appliance Repair Masters is the nearest, roughly 1.5 miles from Irving. No company within 30 miles of Irving names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.7 stars across 35 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Name washers or washing machines in their listing | 16 |
|---|---|
| Distance to the three closest (mi) | 1.5, 1.8, 1.8 |
| Companies within 30 miles | 60 |
| Mention Maytag | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Open on Saturdays (per listing) | 48 |
The leading options for Irving are Benbrook Appliance Repair (29.9 miles away, based in Benbrook, 4.3 stars from 33 reviews); Longhorn Services: HVAC & Appliance Repair (3.2 miles away, 4.8 stars from 606 reviews, lists Saturday hours); Appliance Recovery-Appliance Repair (7.8 miles away, based in Grand Prairie, 5.0 stars from 310 reviews, lists Saturday hours); Sears Appliance Repair (1.8 miles away, 4.5 stars from 284 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
What Maytag Says to Check First
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- Washer will not start or the lid or door stays locked
- Water left in the drum after the cycle
How a Washer Service Call Usually Goes in Irving
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
What Irving Owners Should Know
Most washer calls in Irving come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Irving
- What is the service call or diagnostic fee, and is it applied to the repair?
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the drain pump filter and drain hose before replacing the pump?
Maytag Washer Repair FAQs: Irving, TX
Why does my front-load washer smell?
Is my Maytag washer worth repairing?
Do you work for Maytag?
How do I find a technician who knows Maytag washers?
Other Washer Repair in Irving
Maytag Washer Repair Near Irving
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.