Maytag owners in Ennis usually want two things from a repair company: experience with the brand and quick access to parts. The Ennis list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Ennis
Our data shows 29 appliance repair companies inside a 30-mile radius of Ennis. 1 of them are based in Ennis itself, and the rest are spread across Dallas (8), Midlothian (3), and Cedar Hill (3). Distances run up to about 30 miles. Nearest on the list: Billingsley Appliance Service, around 0.6 miles out. No company within 30 miles of Ennis names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. Across 24 rated companies, the average public rating is 4.2 stars.
Companies are shown by relevance and distance from Ennis. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Repair companies inside 30 miles | 29 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 11 |
| Three nearest companies, miles away | 0.6, 6.2, 13.3 |
| Name washers or washing machines in their listing | 4 |
| Open on Saturdays (per listing) | 19 |
| Mention Maytag | 0 |
At the top of the Ennis list: Benbrook Appliance Repair (52.6 miles away, based in Benbrook, 4.3 stars from 33 reviews); Sears Appliance Repair (13.3 miles away, based in Waxahachie, 4.6 stars from 213 reviews, lists Saturday hours); Mr. Appliance of Mansfield (19.6 miles away, based in Midlothian, 4.6 stars from 532 reviews, lists Saturday hours); Reed's Appliance Repairs (6.2 miles away, based in Palmer, 4.8 stars from 277 reviews).
Maytag Washer Lines and Features
How Maytag Washers Are Built
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
Common Maytag Washer Problems
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Maytag Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
- Burning smell or a motor that hums without turning
How a Washer Service Call Usually Goes in Ennis
Owner Care for Maytag Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Ennis
Most washer calls in Ennis come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Ennis
- How often do you repair Maytag washers, and how quickly can you get parts?
- Is your company licensed where my state requires it, and insured?
- Will you check the drain pump filter and drain hose before replacing the pump?
Maytag Washer Repair FAQs: Ennis, TX
Is this Maytag customer service?
What should I do about a Maytag error code?
Which Ennis technicians work on Maytag?
More Washing Machine Repair in Ennis, TX
Maytag Washer Repair Near Ennis
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.