If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Ennis list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Independent Electrolux Washer Technicians, Ennis TX
29 repair companies serve Ennis from within 30 miles. 1 of them are based in Ennis itself, and the rest are spread across Dallas (8), Midlothian (3), and Cedar Hill (3). Distances run up to about 30 miles. Nearest on the list: Billingsley Appliance Service, around 0.6 miles out. None of the repair companies near Ennis name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.2 stars across 24 businesses.
Companies are shown by relevance and distance from Ennis. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 29 |
|---|---|
| Mention Electrolux | 0 |
| With 4.5+ stars and at least 10 reviews | 11 |
| Listing Saturday hours | 19 |
| Mention washer work | 4 |
| Three nearest companies, miles away | 0.6, 6.2, 13.3 |
Closest matches for Ennis: Mr. Appliance of Mansfield (19.6 miles away, based in Midlothian, 4.6 stars from 532 reviews, lists Saturday hours); Sears Appliance Repair (13.3 miles away, based in Waxahachie, 4.6 stars from 213 reviews, lists Saturday hours); Reed's Appliance Repairs (19.8 miles away, based in Red Oak, 4.7 stars from 115 reviews); Best Thermador repair service (26.5 miles away, based in Dallas, 4.8 stars from 18 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines and Features
What Makes Electrolux Washer Repairs Different
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Symptoms and First Checks
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
Signs Your Electrolux Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Loud banging, shaking or walking during the spin
- An error code on the display
How a Washer Service Call Usually Goes in Ennis
Owner Care for Electrolux Washers
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Electrolux Washer Repair Cost Ranges
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Ennis
Most washer calls in Ennis come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Before You Book in Ennis
- What is the service call or diagnostic fee, and is it applied to the repair?
- If a part has to be ordered, how soon can you come back to finish?
- How often do you repair Electrolux washers, and how quickly can you get parts?
Electrolux Washer Repair FAQs: Ennis, TX
Which Ennis technicians work on Electrolux?
What stops a washer from spinning?
Should I repair or replace my Electrolux washer?
Is this Electrolux customer service?
Other Washer Repair in Ennis
Electrolux Washer Repair Near Ennis
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Ennis technician bring the right parts.