If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Canyon Lake
Within 30 miles of Canyon Lake there are 40 appliance repair companies in our data. 1 list an address in Canyon Lake, and the rest are spread across San Marcos (9), New Braunfels (8), and San Antonio (7). The closest is Spring Branch Appliance Repair, about 4.1 miles away. No company within 90 miles of Canyon Lake mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 32 rated companies in range average 4.6 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Repair companies inside 30 miles | 60 |
|---|---|
| Mention washer work | 12 |
| Mention Maytag | 0 |
| Open on Saturdays (per listing) | 41 |
| Distance to the three closest (mi) | 4.1, 11.3, 12.0 |
| With 4.5+ stars and at least 10 reviews | 19 |
At the top of the Canyon Lake list: Mr. Appliance of Comal & Guadalupe (14.2 miles away, based in New Braunfels, 4.8 stars from 1,033 reviews, lists Saturday hours); Reon Appliance Repair Service (20.6 miles away, based in San Antonio, 4.9 stars from 120 reviews, lists Saturday hours); Matt's Appliance Care (20.4 miles away, based in San Antonio, 5.0 stars from 200 reviews, lists Saturday hours); Quick Tweak Appliance Repair (21.4 miles away, based in San Antonio, 5.0 stars from 264 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Know Your Maytag Washer
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
What Maytag Says to Check First
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
When to Call for Maytag Washer Repair
- Water left in the drum after the cycle
- Washer fills slowly, will not fill, or keeps filling
- Loud banging, shaking or walking during the spin
What Gets Fixed on a Canyon Lake Washer Call
Keeping a Maytag Washer Running
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
What Canyon Lake Owners Should Know
Most washer calls in Canyon Lake come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Canyon Lake
- Is your company licensed where my state requires it, and insured?
- If the washer is leaking, will you find where the water starts before quoting a part?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Canyon Lake, TX
Do you work for Maytag?
How do I get rid of a washer mildew smell?
What should I do about a Maytag error code?
What stops a washer from spinning?
Other Washer Repair in Canyon Lake
Maytag Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.