Maytag owners in Burleson usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Burleson, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Burleson TX
Within 30 miles of Burleson there are 40 appliance repair companies in our data. 3 of them are based in Burleson itself, and other nearby bases include Fort Worth (15), Arlington (6), and Crowley (5). Distances run up to about 16 miles. Nearest on the list: Batteries Plus Phone Repair, around 1.4 miles out. Of those, 1 mentions Maytag by name. Rated companies nearby average 4.6 stars across 37 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 27 |
|---|---|
| Name washers or washing machines in their listing | 15 |
| Open on Saturdays (per listing) | 42 |
| Distance to the three closest (mi) | 1.4, 3.3, 3.5 |
| Appliance repair companies in range (30 mi) | 60 |
| Mention Maytag | 1 |
At the top of the Burleson list: Benbrook Appliance Repair (12.4 miles away, based in Benbrook, 4.3 stars from 33 reviews); Mr. Appliance of Fort Worth (15.6 miles away, based in Fort Worth, 4.7 stars from 403 reviews, lists Saturday hours); Superior Appliances Repair of Fort Worth (15.2 miles away, based in Fort Worth, 4.7 stars from 228 reviews, lists Saturday hours); Quick Viking Appliance Repair (3.5 miles away, 4.3 stars from 22 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines and Features
What Makes Maytag Washer Repairs Different
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Common Maytag Washer Problems
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Musty or mildew smell from the drum or door seal
- Water on the floor under or in front of the washer
- Washer fills slowly, will not fill, or keeps filling
What a Washing Machine Technician Checks
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Burleson Owners Should Know
Most washer calls in Burleson come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Burleson Washer Technician
- How often do you repair Maytag washers, and how quickly can you get parts?
- Do you work on front-load and top-load washers, or only one type?
- If a part has to be ordered, how soon can you come back to finish?
Maytag Washer Repair FAQs: Burleson, TX
Why won't my washer spin?
How do I get rid of a washer mildew smell?
Should I repair or replace my Maytag washer?
Related Repair Pages for Burleson
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Burleson technician bring the right parts.