If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Anderson list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Maytag Washer Repair Near Anderson
Within 30 miles of Anderson there are 28 appliance repair companies in our data. 4 list an address in Anderson, and the rest are spread across Greenville (10), Seneca (4), and Pendleton (2). No company within 90 miles of Anderson mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Sears Appliance Repair, around 1.8 miles out. Rated companies nearby average 4.2 stars across 28 businesses.
Companies are shown by relevance and distance from Anderson. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 11 |
|---|---|
| Mention Maytag | 0 |
| Repair companies inside 30 miles | 28 |
| Distance to the three closest (mi) | 1.8, 2.0, 3.2 |
| With 4.5+ stars and at least 10 reviews | 11 |
| Open on Saturdays (per listing) | 17 |
The leading options for Anderson are Mr. Appliance of Clemson (13.8 miles away, based in Clemson, 4.8 stars from 231 reviews); Boone Appliance (3.2 miles away, 4.7 stars from 149 reviews); The Olde Homestead, Inc. (27.3 miles away, based in Greenville, 4.9 stars from 1,104 reviews); Mr. Appliance of Greater Greenville (29.1 miles away, based in Greenville, 4.8 stars from 1,221 reviews).
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Maytag Washer Symptoms and First Checks
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Anderson
Most washer calls in Anderson come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
In South Carolina, you can check a license with the SC LLR License Lookup or report a problem to the South Carolina Department of Consumer Affairs.
Hiring a Washer Repair Company in Anderson
- Will you check the drain pump filter and drain hose before replacing the pump?
- What guarantee do you give on parts and labor?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: Anderson, SC
Should I repair or replace my Maytag washer?
How do I get rid of a washer mildew smell?
Do you work for Maytag?
Related Repair Pages for Anderson
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.