If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Anderson list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Independent Electrolux Washer Technicians, Anderson SC
28 repair companies serve Anderson from within 30 miles. 4 list an address in Anderson, and other nearby bases include Greenville (10), Seneca (4), and Pendleton (2). Distances run up to about 30 miles. None of the repair companies near Anderson name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Sears Appliance Repair, about 1.8 miles away. Rated companies nearby average 4.2 stars across 28 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Electrolux | 0 |
|---|---|
| Open on Saturdays (per listing) | 17 |
| With 4.5+ stars and at least 10 reviews | 11 |
| Three nearest companies, miles away | 1.8, 2.0, 3.2 |
| Name washers or washing machines in their listing | 11 |
| Repair companies inside 30 miles | 28 |
Closest matches for Anderson: Boone Appliance (3.2 miles away, 4.7 stars from 149 reviews); Mr. Appliance of Clemson (13.8 miles away, based in Clemson, 4.8 stars from 231 reviews); Appliance GrandMasters (24.2 miles away, based in Greenville, 4.7 stars from 1,162 reviews, lists Saturday hours); Sears Appliance Repair (1.8 miles away, 4.1 stars from 35 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Know Your Electrolux Washer
What a Electrolux Washer Technician Deals With
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
What Electrolux Says to Check First
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
When to Call for Electrolux Washer Repair
- Loud banging, shaking or walking during the spin
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Anderson
Care Electrolux Recommends for Its Washers
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Budgeting for a Electrolux Washer Repair
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Anderson
Most washer calls in Anderson come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
In South Carolina, you can check a license with the SC LLR License Lookup or report a problem to the South Carolina Department of Consumer Affairs.
Questions to Ask a Anderson Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
- What is the service call or diagnostic fee, and is it applied to the repair?
Electrolux Washer Repair FAQs: Anderson, SC
Do you work for Electrolux?
Should I repair or replace my Electrolux washer?
What should I do about a Electrolux error code?
Why does my front-load washer smell?
Related Repair Pages for Anderson
More Electrolux Washer Repair Pages Nearby
Also Serving Towns Around Anderson
Electrolux washer repair for Centerville, Homeland Park, Belton, and Hartwell is handled by the same companies listed for Anderson. Each town also has its own washing machine repair page with the nearest companies:
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.