Most Maytag washer repairs in Miller Place involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Miller Place
40 repair companies serve Miller Place from within 30 miles. 1 of them are based in Miller Place itself, and the rest are spread across Holbrook (4), Stony Brook (3), and Holtsville (3). Distances run up to about 13 miles. No company within 90 miles of Miller Place mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Sound Beach Appliance Repair Master is the nearest, roughly 0.4 miles from Miller Place. The 27 rated companies in range average 4.2 stars.
Companies are shown by relevance and distance from Miller Place. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Companies within 30 miles | 60 |
|---|---|
| Mention washer work | 5 |
| Listing Saturday hours | 40 |
| Rated 4.5 stars or higher (10+ reviews) | 17 |
| Three nearest companies, miles away | 0.4, 2.3, 3.5 |
| Mention Maytag | 0 |
At the top of the Miller Place list: Island Wide Appliance (12.2 miles away, based in Patchogue, 4.5 stars from 322 reviews); LJ Appliance Repair Service (5.1 miles away, based in Ridge, 4.6 stars from 22 reviews, lists Saturday hours); JIC Appliance Care LLC (12.1 miles away, based in Holbrook, 5.0 stars from 377 reviews, lists Saturday hours); EASTERN GRILLS LLC - BBQ Grill (6.9 miles away, based in Medford, 5.0 stars from 365 reviews, lists Saturday hours).
Maytag Washer Lines and Features
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
When to Call for Maytag Washer Repair
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Miller Place
Owner Care for Maytag Washers
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
Around Miller Place
Most washer calls in Miller Place come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card
In New York, you can report a problem to the New York State Office of the Attorney General, Bureau of Consumer Frauds and Protection.
Questions to Ask a Miller Place Washer Technician
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Will you check the drain pump filter and drain hose before replacing the pump?
Maytag Washer Repair FAQs: Miller Place, NY
What should I do about a Maytag error code?
Do you work for Maytag?
Where is the water under my washer coming from?
Why won't my washer spin?
Related Repair Pages for Miller Place
Maytag Washer Repair Near Miller Place
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Miller Place technician bring the right parts.