Most Maytag washer repairs in Sun Valley involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Sun Valley, with those that mention Maytag first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Independent Maytag Washer Technicians, Sun Valley NV
Within 30 miles of Sun Valley there are 25 appliance repair companies in our data. 1 list an address in Sun Valley, and the rest are spread across Reno (15), Sparks (5), and Carson City (2). The farthest listed company is about 29 miles out. The closest is Burney’s Commercial Service inc, about 2.2 miles away. None of the repair companies near Sun Valley name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.4 stars across 21 businesses.
Companies are shown by relevance and distance from Sun Valley. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Maytag | 0 |
|---|---|
| Repair companies inside 30 miles | 25 |
| Rated 4.5 stars or higher (10+ reviews) | 12 |
| Mention washer work | 8 |
| Distance to the three closest (mi) | 2.2, 2.8, 3.4 |
| Open on Saturdays (per listing) | 16 |
Closest matches for Sun Valley: Mr. Appliance of Reno (6.5 miles away, based in Reno, 4.8 stars from 925 reviews, lists Saturday hours); All Star Dryer Vent (11.8 miles away, based in Reno, 4.9 stars from 174 reviews, lists Saturday hours); Sears Appliance Repair (3.4 miles away, based in Reno, 4.5 stars from 110 reviews, lists Saturday hours); Sears Appliance Repair (10.3 miles away, based in Reno, 4.5 stars from 75 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Maytag Washer Symptoms and First Checks
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Signs Your Maytag Washer Needs a Technician
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
What Sun Valley Owners Should Know
Most washer calls in Sun Valley come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Nevada has no license class for appliance repair as such; contracting work on gas piping, gas vents and water heaters falls under the State Contractors Board's C-1 plumbing and heating subclassifications. Source: Nevada Administrative Code Chapter 624 (NAC 624.190)
In Nevada, you can check a license with the Nevada State Contractors Board License Search or report a problem to the Nevada Attorney General, Bureau of Consumer Protection.
Questions to Ask a Sun Valley Washer Technician
- What guarantee do you give on parts and labor?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Maytag Washer Repair FAQs: Sun Valley, NV
What should I do about a Maytag error code?
Why is my washer leaking?
Is this Maytag customer service?
More Washing Machine Repair in Sun Valley, NV
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.