If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Holdrege
We found 7 appliance repair companies within 60 miles of Holdrege. Other nearby bases include Kearney (4), Hastings (2), and Lexington (1). Distances run up to about 54 miles. Nearest on the list: Aunt Jo's Maytag-Home Appliance Center, around 23.9 miles out. 1 of them mentions Maytag in their listing or website. Across 6 rated companies, the average public rating is 4.0 stars. Holdrege is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Holdrege. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 1 |
|---|---|
| Mention Maytag | 1 |
| With 4.5+ stars and at least 10 reviews | 3 |
| Listing Saturday hours | 3 |
| Appliance repair companies in range (60 mi) | 7 |
| Three nearest companies, miles away | 23.9, 24.9, 25.1 |
Closest matches for Holdrege: Aunt Jo's Maytag-Home Appliance Center (23.9 miles away, based in Kearney, 4.8 stars from 60 reviews); Sears Appliance Repair (25.3 miles away, based in Kearney, 4.7 stars from 27 reviews, lists Saturday hours); Martin Electric Co. (30.1 miles away, based in Lexington, 4.5 stars from 11 reviews, lists Saturday hours); Chaney Repair (24.9 miles away, based in Kearney, 5.0 stars from 9 reviews).
Know Your Maytag Washer
What Makes Maytag Washer Repairs Different
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Common Maytag Washer Problems
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Maytag Washer Problems Worth a Service Call
- Washer will not spin, or clothes come out soaking wet
- Water on the floor under or in front of the washer
- Washer fills slowly, will not fill, or keeps filling
What Gets Fixed on a Holdrege Washer Call
Owner Care for Maytag Washers
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Holdrege, NE
Most washer calls in Holdrege come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Nebraska does not license appliance repair technicians at the state level; contractors working on other people's property register with the Department of Labor, and trade licenses such as plumbing are handled by cities and villages. Source: Nebraska Department of Labor: Who Needs to Register
In Nebraska, you can check a license with the Nebraska Department of Labor contractor registration (Search Registered Contractors and Subcontractors) or report a problem to the Nebraska Attorney General, Consumer Protection Division.
Questions to Ask a Holdrege Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- If the washer is leaking, will you find where the water starts before quoting a part?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Holdrege, NE
What stops a washer from spinning?
Why does my Maytag washer show an error code?
Why does my front-load washer smell?
Is this Maytag customer service?
More Washing Machine Repair in Holdrege, NE
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.