Maytag owners in Washington usually want two things from a repair company: experience with the brand and quick access to parts. The Washington list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Independent Maytag Washer Technicians, Washington NC
28 repair companies serve Washington from within 60 miles. 4 list an address in Washington, and the rest are spread across Goldsboro (4), Jacksonville (4), and New Bern (3). The farthest listed company is about 60 miles out. No company within 90 miles of Washington mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Appliance Doctor, about 0.7 miles away. Across 23 rated companies, the average public rating is 4.4 stars. Because the nearest shops are farther out, ask each company whether Washington is inside its regular service area.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Rated 4.5 stars or higher (10+ reviews) | 12 |
|---|---|
| Mention washer work | 8 |
| Distance to the three closest (mi) | 0.7, 3.9, 5.1 |
| Mention Maytag | 0 |
| Repair companies inside 60 miles | 28 |
| Listing Saturday hours | 13 |
First up for Washington: Sears Appliance Repair (19.8 miles away, based in Greenville, 4.3 stars from 220 reviews, lists Saturday hours); Cavalry Appliance Service (32.1 miles away, based in New Bern, 4.9 stars from 535 reviews); Sears Appliance Repair (51.4 miles away, based in Goldsboro, 4.7 stars from 225 reviews, lists Saturday hours); JB Appliance Solutions (57.3 miles away, based in Nashville, 4.9 stars from 638 reviews).
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Common Maytag Washer Problems
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Washer fills slowly, will not fill, or keeps filling
- An error code on the display
- Grinding or roaring noise that rises with spin speed
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
Around Washington
Most washer calls in Washington come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Washington
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Washington, NC
Why is my washer leaking?
How do I find a technician who knows Maytag washers?
Is this Maytag customer service?
Why won't my washer spin?
Related Repair Pages for Washington
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.