Most Maytag washer repairs in Walkertown involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Walkertown list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Walkertown
We found 40 appliance repair companies within 30 miles of Walkertown. Other nearby bases include High Point (11), Winston-Salem (9), and Greensboro (8). The farthest listed company is about 20 miles out. Nearest on the list: Larkwell Appliance Works, around 3.6 miles out. None of the repair companies near Walkertown name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 22 rated companies in range average 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Companies within 30 miles | 55 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 12 |
| Listing Saturday hours | 39 |
| Name washers or washing machines in their listing | 5 |
| Three nearest companies, miles away | 3.6, 3.6, 5.0 |
| Mention Maytag | 0 |
At the top of the Walkertown list: John Michael & Associates, Inc. (14.5 miles away, based in High Point, 4.7 stars from 230 reviews); Convenient Appliance Service (9.8 miles away, based in Winston-Salem, 4.9 stars from 2,279 reviews); Sears Appliance Repair (14.9 miles away, based in Clemmons, 4.6 stars from 290 reviews, lists Saturday hours); Sears Appliance Repair (19.1 miles away, based in Greensboro, 4.4 stars from 955 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
When to Call for Maytag Washer Repair
- Burning smell or a motor that hums without turning
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
How a Washer Service Call Usually Goes in Walkertown
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Walkertown
Most washer calls in Walkertown come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Questions to Ask a Walkertown Washer Technician
- How often do you repair Maytag washers, and how quickly can you get parts?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on front-load and top-load washers, or only one type?
Maytag Washer Repair FAQs: Walkertown, NC
Where is the water under my washer coming from?
Is this Maytag customer service?
Why won't my washer spin?
Should I repair or replace my Maytag washer?
Related Repair Pages for Walkertown
Maytag Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.