If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Nixa list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Nixa
We found 40 appliance repair companies within 30 miles of Nixa. The rest are spread across Springfield (33), Ozark (2), and Aurora (2). The closest is Advanced Appliance Services, about 3.7 miles away. None of the repair companies near Nixa name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.4 stars across 19 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Maytag | 0 |
|---|---|
| Name washers or washing machines in their listing | 5 |
| Three nearest companies, miles away | 3.7, 4.9, 5.0 |
| Companies within 30 miles | 44 |
| With 4.5+ stars and at least 10 reviews | 9 |
| Listing Saturday hours | 31 |
At the top of the Nixa list: Service Brothers Appliance Repair (5.3 miles away, based in Springfield, 4.7 stars from 655 reviews); Sears Appliance Repair (24.3 miles away, based in Aurora, 4.6 stars from 271 reviews, lists Saturday hours); EZ Appliance Geeks (11.2 miles away, based in Springfield, 3.8 stars from 10 reviews, lists Saturday hours); Certified Appliance Repair (5.2 miles away, based in Springfield, 5.0 stars from 97 reviews).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Maytag Washer Symptoms and First Checks
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- Loud banging, shaking or walking during the spin
- Burning smell or a motor that hums without turning
Inside a Washer Repair Visit
Owner Care for Maytag Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
Laundry Notes for Nixa, MO
Most washer calls in Nixa come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Questions to Ask a Nixa Washer Technician
- Can you give a written estimate before ordering parts?
- What is the service call or diagnostic fee, and is it applied to the repair?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Nixa, MO
Why does my Maytag washer show an error code?
What stops a washer from spinning?
Why does my front-load washer smell?
Related Repair Pages for Nixa
Maytag Washer Repair Near Nixa
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Nixa technician bring the right parts.