Maytag owners in Burnsville usually want two things from a repair company: experience with the brand and quick access to parts. The Burnsville list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Independent Maytag Washer Technicians, Burnsville MN
Our data shows 40 appliance repair companies inside a 30-mile radius of Burnsville. 4 of them are based in Burnsville itself, and the rest are spread across Minneapolis (5), Hopkins (5), and Bloomington (4). Distances run up to about 14 miles. No company within 90 miles of Burnsville mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is RJ Appliance Repair, about 1.2 miles away. The 29 rated companies in range average 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| Name washers or washing machines in their listing | 10 |
| Distance to the three closest (mi) | 1.2, 1.5, 1.7 |
| With 4.5+ stars and at least 10 reviews | 22 |
| Open on Saturdays (per listing) | 45 |
| Mention Maytag | 0 |
Closest matches for Burnsville: Appliance Repair Pro (3.2 miles away, based in Savage, 5.0 stars from 500 reviews, lists Saturday hours); SERVICE MATTERS Heating & Air & Appliance Repair LLC (6.2 miles away, based in Apple Valley, 4.9 stars from 141 reviews, lists Saturday hours); Super Care Appliance Repair (13.4 miles away, based in West St Paul, 4.9 stars from 1,075 reviews, lists Saturday hours); AMA Appliance Service (13.1 miles away, based in Hopkins, 5.0 stars from 82 reviews).
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Maytag Washer Symptoms and First Checks
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
When to Call for Maytag Washer Repair
- Loud banging, shaking or walking during the spin
- An error code on the display
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Burnsville
Most washer calls in Burnsville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Questions to Ask a Burnsville Washer Technician
- How often do you repair Maytag washers, and how quickly can you get parts?
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Burnsville, MN
Is my Maytag washer worth repairing?
Why won't my washer spin?
Why is my washer leaking?
Other Washer Repair in Burnsville
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.