Most GE washer repairs in Burnsville involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Burnsville list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Burnsville
We found 40 appliance repair companies within 30 miles of Burnsville. 4 list an address in Burnsville, and other nearby bases include Minneapolis (5), Hopkins (5), and Bloomington (4). None of the repair companies near Burnsville name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: RJ Appliance Repair, around 1.2 miles out. The 29 rated companies in range average 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Mention washer work | 10 |
| Three nearest companies, miles away | 1.2, 1.5, 1.7 |
| With 4.5+ stars and at least 10 reviews | 22 |
| Open on Saturdays (per listing) | 45 |
| Appliance repair companies in range (30 mi) | 60 |
Closest matches for Burnsville: Appliance Repair Pro (3.2 miles away, based in Savage, 5.0 stars from 500 reviews, lists Saturday hours); Super Care Appliance Repair (13.4 miles away, based in West St Paul, 4.9 stars from 1,075 reviews, lists Saturday hours); SERVICE MATTERS Heating & Air & Appliance Repair LLC (6.2 miles away, based in Apple Valley, 4.9 stars from 141 reviews, lists Saturday hours); AMA Appliance Service (13.1 miles away, based in Hopkins, 5.0 stars from 82 reviews).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines and Features
What Makes GE Washer Repairs Different
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Says to Check First
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
Signs Your GE Washer Needs a Technician
- Washer fills slowly, will not fill, or keeps filling
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
Inside a Washer Repair Visit
Keeping a GE Washer Running
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
Local Notes for Burnsville
Most washer calls in Burnsville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Questions to Ask a Burnsville Washer Technician
- If a part has to be ordered, how soon can you come back to finish?
- Can you give a written estimate before ordering parts?
- How often do you repair GE washers, and how quickly can you get parts?
GE Washer Repair FAQs: Burnsville, MN
Why won't my washer spin?
What should I do about a GE error code?
Do you work for GE?
Other Washer Repair in Burnsville
GE Washer Repair Near Burnsville
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Burnsville technician bring the right parts.