Most Maytag washer repairs in Buffalo involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Buffalo, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Buffalo
We found 40 appliance repair companies within 30 miles of Buffalo. Other nearby bases include Plymouth (4), Wayzata (3), and Hopkins (3). No company within 90 miles of Buffalo mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Home Appliance Service is the nearest, roughly 7.8 miles from Buffalo. Rated companies nearby average 4.5 stars across 22 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 34 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 16 |
| Three nearest companies, miles away | 7.8, 10.0, 10.2 |
| Mention washer work | 7 |
| Repair companies inside 30 miles | 50 |
| Mention Maytag | 0 |
The leading options for Buffalo are Omega Force Appliance Repair (15.0 miles away, based in Rogers, 4.9 stars from 1,637 reviews, lists Saturday hours); Home Appliance Service (7.8 miles away, based in Maple Lake, 5.0 stars from 230 reviews, lists Saturday hours); AMA Appliance Service (27.8 miles away, based in Hopkins, 5.0 stars from 82 reviews); Sears Appliance Repair (25.6 miles away, based in Minnetonka, 4.4 stars from 217 reviews, lists Saturday hours).
Know Your Maytag Washer
How Maytag Washers Are Built
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Common Maytag Washer Problems
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
When to Call for Maytag Washer Repair
- Washer will not start or the lid or door stays locked
- An error code on the display
- Water left in the drum after the cycle
What Gets Fixed on a Buffalo Washer Call
Keeping a Maytag Washer Running
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Buffalo
Most washer calls in Buffalo come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Before You Book in Buffalo
- Do you work on front-load and top-load washers, or only one type?
- What is the service call or diagnostic fee, and is it applied to the repair?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Buffalo, MN
Why won't my washer spin?
Why does my Maytag washer show an error code?
Why is my washer leaking?
Other Washer Repair in Buffalo
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.