Most Maytag washer repairs in St. Louis involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving St. Louis, with those that mention Maytag first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Independent Maytag Washer Technicians, St. Louis MI
40 repair companies serve St. Louis from within 60 miles. Other nearby bases include Lansing (5), Saginaw (3), and Bay City (3). Distances run up to about 54 miles. Nearest on the list: Sears Appliance Repair, around 2.8 miles out. No company within 90 miles of St. Louis mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 39 rated companies in range average 4.3 stars. St. Louis is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from St. Louis. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| With 4.5+ stars and at least 10 reviews | 24 |
|---|---|
| Listing Saturday hours | 28 |
| Appliance repair companies in range (60 mi) | 56 |
| Mention Maytag | 0 |
| Mention washer work | 14 |
| Three nearest companies, miles away | 2.8, 13.8, 14.0 |
The leading options for St. Louis are Sears Appliance Repair (2.8 miles away, based in Alma, 4.5 stars from 36 reviews, lists Saturday hours); Sears Appliance Repair (14.0 miles away, based in Mt Pleasant, 4.7 stars from 98 reviews, lists Saturday hours); Lane’s Appliance Sales and Service (46.6 miles away, based in Lansing, 4.8 stars from 1,676 reviews, lists Saturday hours); Samaritan Appliance Sales and Service (21.6 miles away, based in Sanford, 4.8 stars from 626 reviews).
Know Your Maytag Washer
How Maytag Washers Are Built
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
Maytag Washer Symptoms and First Checks
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
Maytag Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Washer will not start or the lid or door stays locked
- An error code on the display
What Gets Fixed on a St. Louis Washer Call
Owner Care for Maytag Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- How old the washer is
What St. Louis Owners Should Know
Most washer calls in St. Louis come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Questions to Ask a St. Louis Washer Technician
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Maytag Washer Repair FAQs: St. Louis, MI
Do you work for Maytag?
How do I find a technician who knows Maytag washers?
Why does my Maytag washer show an error code?
Where is the water under my washer coming from?
Other Washer Repair in St. Louis
Maytag Washer Repair in Nearby Cities
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a St. Louis technician bring the right parts.