A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Port Huron
Within 60 miles of Port Huron there are 40 appliance repair companies in our data. 1 list an address in Port Huron, and other nearby bases include Clinton Township (5), Warren (3), and Sterling Heights (2). Distances run up to about 46 miles. Nearest on the list: Attaboy Repair Llc, around 1.6 miles out. None of the companies within 60 miles mention Maytag by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The 36 rated companies in range average 4.1 stars. Port Huron is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Companies within 60 miles | 60 |
|---|---|
| Mention washer work | 24 |
| Distance to the three closest (mi) | 1.6, 2.8, 14.0 |
| Mention Maytag | 1 |
| Open on Saturdays (per listing) | 40 |
| Rated 4.5 stars or higher (10+ reviews) | 27 |
The leading options for Port Huron are A Dependable Maytag Home Appliance (47.8 miles away, based in Royal Oak, 4.3 stars from 101 reviews, lists Saturday hours); Sears Appliance Repair (2.8 miles away, based in Fort Gratiot Township, 4.8 stars from 41 reviews, lists Saturday hours); Sears Appliance Repair (20.1 miles away, based in Marine City, 4.6 stars from 34 reviews, lists Saturday hours); Detroit Appliance (40.8 miles away, based in Fraser, 4.8 stars from 1,139 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
Maytag Washer Problems Worth a Service Call
- An error code on the display
- Burning smell or a motor that hums without turning
- Water left in the drum after the cycle
Inside a Washer Repair Visit
Keeping a Maytag Washer Running
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
Around Port Huron
Most washer calls in Port Huron come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Port Huron
- Will you check the drain pump filter and drain hose before replacing the pump?
- How often do you repair Maytag washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: Port Huron, MI
Do you work for Maytag?
Why does my front-load washer smell?
Why won't my washer spin?
Why is my washer leaking?
Related Repair Pages for Port Huron
Maytag Washer Repair Near Port Huron
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.