If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Maytag Washer Repair Near Iron Mountain
7 repair companies serve Iron Mountain from within 60 miles. Other nearby bases include Kingsford (1), Wausaukee (1), and Escanaba (1). The closest is Sears Appliance Repair, about 1.9 miles away. No company within 90 miles of Iron Mountain mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.0 stars across 7 businesses. Iron Mountain is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention washer work | 4 |
|---|---|
| Three nearest companies, miles away | 1.9, 37.4, 47.5 |
| Repair companies inside 60 miles | 7 |
| Mention Maytag | 0 |
| Open on Saturdays (per listing) | 6 |
| Rated 4.5 stars or higher (10+ reviews) | 2 |
At the top of the Iron Mountain list: Sears Appliance Repair (1.9 miles away, based in Kingsford, 4.3 stars from 25 reviews, lists Saturday hours); Sears Appliance Repair (54.3 miles away, based in Menominee, 4.4 stars from 14 reviews, lists Saturday hours); Sears Appliance Repair (47.5 miles away, based in Escanaba, 4.7 stars from 14 reviews, lists Saturday hours); Jewett Used Appliances & Repair (37.4 miles away, based in Wausaukee, 4.7 stars from 24 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
When to Call for Maytag Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
How a Washer Service Call Usually Goes in Iron Mountain
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Iron Mountain
Most washer calls in Iron Mountain come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Questions to Ask a Iron Mountain Washer Technician
- Will you check the drain pump filter and drain hose before replacing the pump?
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Iron Mountain, MI
Why does my Maytag washer show an error code?
Where is the water under my washer coming from?
How do I find a technician who knows Maytag washers?
Related Repair Pages for Iron Mountain
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.