Most Maytag washer repairs in Garden City involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Who Works on Maytag Washers Near Garden City
40 repair companies serve Garden City from within 30 miles. Other nearby bases include Livonia (11), Detroit (7), and Dearborn Heights (3). The farthest listed company is about 10 miles out. No company within 30 miles of Garden City names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. The closest is Mr. Appliance of Dearborn Heights, about 2.5 miles away. Rated companies nearby average 4.2 stars across 38 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 18 |
|---|---|
| Mention washer work | 12 |
| Three nearest companies, miles away | 2.5, 2.7, 3.1 |
| Companies within 30 miles | 60 |
| Open on Saturdays (per listing) | 37 |
| Mention Maytag | 0 |
The leading options for Garden City are A Dependable Maytag Home Appliance (16.9 miles away, based in Royal Oak, 4.3 stars from 101 reviews, lists Saturday hours); Mr. Appliance of Oakland County (4.4 miles away, based in Livonia, 4.8 stars from 1,216 reviews, lists Saturday hours); Sears Appliance Repair (8.8 miles away, based in Lincoln Park, 4.6 stars from 271 reviews, lists Saturday hours); Sears Appliance Repair (2.7 miles away, based in Westland, 4.2 stars from 451 reviews, lists Saturday hours).
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Grinding or roaring noise that rises with spin speed
- Water on the floor under or in front of the washer
Inside a Washer Repair Visit
Keeping a Maytag Washer Running
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- How old the washer is
Local Notes for Garden City
Most washer calls in Garden City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Questions to Ask a Garden City Washer Technician
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: Garden City, MI
Is my Maytag washer worth repairing?
What stops a washer from spinning?
Where is the water under my washer coming from?
Related Repair Pages for Garden City
Maytag Washer Repair Near Garden City
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.