Most Maytag washer repairs in Flushing involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Flushing list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Flushing
20 repair companies serve Flushing from within 30 miles. 2 of them are based in Flushing itself, and other nearby bases include Flint (4), Clio (2), and Burton (2). Distances run up to about 30 miles. No company within 30 miles of Flushing names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. The closest is Pointe Appliance Service, about 1.6 miles away. The 19 rated companies in range average 4.0 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Repair companies inside 30 miles | 20 |
|---|---|
| Listing Saturday hours | 9 |
| With 4.5+ stars and at least 10 reviews | 8 |
| Name washers or washing machines in their listing | 5 |
| Mention Maytag | 0 |
| Distance to the three closest (mi) | 1.6, 1.7, 5.4 |
At the top of the Flushing list: A Dependable Maytag Home Appliance (51.7 miles away, based in Royal Oak, 4.3 stars from 101 reviews, lists Saturday hours); Sears Appliance Repair (8.9 miles away, based in Clio, 4.3 stars from 74 reviews, lists Saturday hours); Sears Appliance Repair (18.1 miles away, based in Fenton, 4.6 stars from 115 reviews, lists Saturday hours); Sears Appliance Repair (6.6 miles away, based in Flint, 4.6 stars from 152 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
When to Call for Maytag Washer Repair
- An error code on the display
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
How a Washer Service Call Usually Goes in Flushing
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
Laundry Notes for Flushing, MI
Most washer calls in Flushing come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Questions to Ask a Flushing Washer Technician
- Will you check the drain pump filter and drain hose before replacing the pump?
- Is your company licensed where my state requires it, and insured?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: Flushing, MI
How do I get rid of a washer mildew smell?
Is my Maytag washer worth repairing?
Do you work for Maytag?
Related Repair Pages for Flushing
Maytag Washer Repair Near Flushing
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Flushing technician bring the right parts.