A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Who Works on Maytag Washers Near Glenarden
40 repair companies serve Glenarden from within 30 miles. The rest are spread across Washington (8), Hyattsville (4), and Bowie (3). The farthest listed company is about 9 miles out. No company within 30 miles of Glenarden names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. The closest is Miracle Appliance Repair, about 1.2 miles away. The 36 rated companies in range average 4.1 stars.
Companies are shown by relevance and distance from Glenarden. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 9 |
|---|---|
| Repair companies inside 30 miles | 60 |
| Mention Maytag | 1 |
| Listing Saturday hours | 38 |
| Distance to the three closest (mi) | 1.2, 2.0, 2.4 |
| With 4.5+ stars and at least 10 reviews | 11 |
First up for Glenarden: Arlington Maytag Appliance Rpr (13.7 miles away, based in Arlington, 3.8 stars from 11 reviews); Maytag (9.2 miles away, based in Washington, 2.0 stars from 11 reviews); Mr. Appliance of Central Maryland (2.0 miles away, based in Largo, 4.8 stars from 330 reviews); SK Appliance Repair (7.4 miles away, based in Camp Springs, 5.0 stars from 404 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Maytag Washer Symptoms and First Checks
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
- Washer fills slowly, will not fill, or keeps filling
What Gets Fixed on a Glenarden Washer Call
Owner Care for Maytag Washers
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
What Glenarden Owners Should Know
Most washer calls in Glenarden come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Glenarden
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Can you give a written estimate before ordering parts?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Glenarden, MD
Which Glenarden technicians work on Maytag?
What should I do about a Maytag error code?
How do I get rid of a washer mildew smell?
Why is my washer leaking?
Related Repair Pages for Glenarden
Maytag Washer Repair Near Glenarden
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Glenarden technician bring the right parts.