Maytag Washer Repair in Burtonsville, MD

A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.

Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.

Independent Maytag Washer Technicians, Burtonsville MD

We found 40 appliance repair companies within 30 miles of Burtonsville. 3 list an address in Burtonsville, and other nearby bases include Silver Spring (9), Laurel (6), and Columbia (6). The farthest listed company is about 9 miles out. No company within 30 miles of Burtonsville names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. Superior Burtonsville Appliance Repair is the nearest, roughly 0.3 miles from Burtonsville. Across 36 rated companies, the average public rating is 4.5 stars.

Companies are shown by relevance and distance from Burtonsville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Closest matches for Burtonsville: Arlington Maytag Appliance Rpr (18.6 miles away, based in Arlington, 3.8 stars from 11 reviews); Maytag (15.9 miles away, based in Washington, 2.0 stars from 11 reviews); TruFix Appliance Repair & Services, LLC (5.8 miles away, based in Silver Spring, 4.8 stars from 240 reviews, lists Saturday hours); Dexterous Appliance Repair (2.7 miles away, based in Fulton, 4.9 stars from 319 reviews).

Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.

Know Your Maytag Washer

How Maytag Washers Are Built

A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information

The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide

What Maytag Says to Check First

• Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
• Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)

Reading a Maytag Washer Error Code

When to Call for Maytag Washer Repair

• Washer fills slowly, will not fill, or keeps filling
• Water left in the drum after the cycle
• Burning smell or a motor that hums without turning

What a Washing Machine Technician Checks

Keeping a Maytag Washer Running

• Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
• On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal

Brand guides: Maytag Washer Not Draining or Spinning: Causes.

Budgeting for a Maytag Washer Repair

A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:

• Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
• Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
• Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
• After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Before the Technician Arrives

• Any error code shown on the display
• Where the washer drains (standpipe or laundry sink)
• The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet

Local Notes for Burtonsville

Most washer calls in Burtonsville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Before You Book in Burtonsville

• Will you check the drain pump filter and drain hose before replacing the pump?
• What guarantee do you give on parts and labor?
• How often do you repair Maytag washers, and how quickly can you get parts?

Maytag Washer Repair FAQs: Burtonsville, MD

Related Repair Pages for Burtonsville

Maytag Washer Repair Near Burtonsville

Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.