A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Owensboro KY
18 repair companies serve Owensboro from within 30 miles. 5 of them are based in Owensboro itself, and other nearby bases include Evansville (7), Henderson (2), and Utica (1). Distances run up to about 29 miles. None of the repair companies near Owensboro name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Sears Appliance Repair, about 0.5 miles away. The 15 rated companies in range average 4.2 stars.
Companies are shown by relevance and distance from Owensboro. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 18 |
|---|---|
| Three nearest companies, miles away | 0.5, 0.9, 0.9 |
| Mention washer work | 5 |
| With 4.5+ stars and at least 10 reviews | 6 |
| Open on Saturdays (per listing) | 9 |
| Mention Maytag | 0 |
The leading options for Owensboro are Mr. Appliance of Owensboro (0.9 miles away, 4.9 stars from 384 reviews); Sears Appliance Repair (24.8 miles away, based in Evansville, 4.5 stars from 207 reviews, lists Saturday hours); Sears Appliance Repair (0.5 miles away, 4.3 stars from 56 reviews, lists Saturday hours); Sears Appliance Repair (24.4 miles away, based in Henderson, 4.0 stars from 22 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Maytag Washer Symptoms and First Checks
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
When to Call for Maytag Washer Repair
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
- Loud banging, shaking or walking during the spin
Inside a Washer Repair Visit
Keeping a Maytag Washer Running
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Owensboro
Most washer calls in Owensboro come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Kentucky has no license category for appliance repair as such; the Department of Housing, Buildings and Construction licenses trades such as HVAC (whose scope covers installing and repairing heating, burner and cooling systems), plumbing and electrical. Source: KRS 198B.650 Definitions (Kentucky Legislative Research Commission)
In Kentucky, you can check a license with the Department of Housing, Buildings and Construction License Search and Verification or report a problem to the Kentucky Attorney General, Office of Consumer Protection.
How to Choose a Washing Machine Technician Near Owensboro
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Owensboro, KY
Why does my Maytag washer show an error code?
Why won't my washer spin?
Which Owensboro technicians work on Maytag?
Other Washer Repair in Owensboro
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Owensboro technician bring the right parts.