Most Maytag washer repairs in Humboldt involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Humboldt list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Humboldt
We found 9 appliance repair companies within 60 miles of Humboldt. The rest are spread across Algona (2), Webster City (1), and Storm Lake (1). The farthest listed company is about 58 miles out. Nearest on the list: Algona Appliance, around 23.8 miles out. No company within 90 miles of Humboldt mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.5 stars across 9 businesses. Because the nearest shops are farther out, ask each company whether Humboldt is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 4 |
|---|---|
| Distance to the three closest (mi) | 23.8, 24.8, 27.9 |
| Mention Maytag | 0 |
| Mention washer work | 4 |
| Appliance repair companies in range (60 mi) | 9 |
| Listing Saturday hours | 6 |
At the top of the Humboldt list: Sears Appliance Repair (27.9 miles away, based in Webster City, 4.6 stars from 38 reviews, lists Saturday hours); Sears Appliance Repair (24.8 miles away, based in Algona, 4.4 stars from 15 reviews, lists Saturday hours); Sears Appliance Repair (56.2 miles away, based in Carroll, 4.8 stars from 25 reviews, lists Saturday hours); Ken's Appliance & Services LLC (57.7 miles away, based in Ames, 4.0 stars from 90 reviews, lists Saturday hours).
Maytag Washer Lines and Features
What Makes Maytag Washer Repairs Different
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Common Maytag Washer Problems
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- An error code on the display
- Washer will not start or the lid or door stays locked
- Burning smell or a motor that hums without turning
What a Washing Machine Technician Checks
Owner Care for Maytag Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
Laundry Notes for Humboldt, IA
Most washer calls in Humboldt come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
In Iowa, you can check a license with the Iowa DIAL Find a Record or License (Plumbing & Mechanical Systems Board public search) or report a problem to the Iowa Attorney General Consumer Protection Division.
Before You Book in Humboldt
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: Humboldt, IA
Why does my front-load washer smell?
How do I find a technician who knows Maytag washers?
What stops a washer from spinning?
Why is my washer leaking?
Related Repair Pages for Humboldt
Maytag Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.