A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Union City list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Union City
Our data shows 40 appliance repair companies inside a 30-mile radius of Union City. Other nearby bases include Atlanta (18), Douglasville (5), and Fayetteville (3). None of the repair companies near Union City name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Fairburn Appliance Repair is the nearest, roughly 2.2 miles from Union City. Rated companies nearby average 4.5 stars across 35 businesses.
Companies are shown by relevance and distance from Union City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| With 4.5+ stars and at least 10 reviews | 16 |
|---|---|
| Appliance repair companies in range (30 mi) | 60 |
| Distance to the three closest (mi) | 2.2, 3.9, 6.9 |
| Listing Saturday hours | 32 |
| Mention Maytag | 0 |
| Name washers or washing machines in their listing | 11 |
Closest matches for Union City: Sears Appliance Repair (13.9 miles away, based in Douglasville, 4.7 stars from 281 reviews, lists Saturday hours); Mr. Appliance of Douglasville (14.9 miles away, based in Douglasville, 4.7 stars from 997 reviews, lists Saturday hours); City Boys R Us Div. 954 Appliance Repair (8.8 miles away, based in Atlanta, 4.3 stars from 98 reviews, lists Saturday hours); Sears Appliance Repair (10.8 miles away, based in Fayetteville, 4.4 stars from 373 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
What Maytag Says to Check First
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Washer will not start or the lid or door stays locked
- Grinding or roaring noise that rises with spin speed
- Water on the floor under or in front of the washer
Inside a Washer Repair Visit
Owner Care for Maytag Washers
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
What Union City Owners Should Know
Most washer calls in Union City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Georgia has no appliance repair license; the Secretary of State's construction-related licensing boards cover conditioned air, electrical, plumbing, low voltage, utility and residential/general contractors, with no separate appliance category. Source: Georgia Licensing Boards (Georgia Secretary of State)
In Georgia, you can check a license with the Georgia Secretary of State Licensing Division License Lookup or report a problem to the Georgia Attorney General's Consumer Protection Division.
Hiring a Washer Repair Company in Union City
- How often do you repair Maytag washers, and how quickly can you get parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
Maytag Washer Repair FAQs: Union City, GA
Should I repair or replace my Maytag washer?
Is this Maytag customer service?
Why won't my washer spin?
More Washing Machine Repair in Union City, GA
Maytag Washer Repair Near Union City
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.