If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Holly Springs
We found 40 appliance repair companies within 30 miles of Holly Springs. The rest are spread across Canton (12), Woodstock (12), and Roswell (6). Distances run up to about 13 miles. No company within 90 miles of Holly Springs mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Village Appliance Repair LLC is the nearest, roughly 0.4 miles from Holly Springs. The 31 rated companies in range average 4.7 stars.
Companies are shown by relevance and distance from Holly Springs. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| With 4.5+ stars and at least 10 reviews | 27 |
|---|---|
| Mention washer work | 15 |
| Companies within 30 miles | 60 |
| Open on Saturdays (per listing) | 42 |
| Mention Maytag | 0 |
| Distance to the three closest (mi) | 0.4, 1.3, 1.5 |
Closest matches for Holly Springs: Appliance Care of Atlanta (12.3 miles away, based in Alpharetta, 4.8 stars from 2,520 reviews, lists Saturday hours); Sears Appliance Repair (11.4 miles away, based in Kennesaw, 4.5 stars from 274 reviews, lists Saturday hours); Sears Appliance Repair (6.2 miles away, based in Canton, 4.6 stars from 128 reviews, lists Saturday hours); Absolute Appliance Repair (9.3 miles away, based in Alpharetta, 4.7 stars from 311 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
What Maytag Says to Check First
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Signs Your Maytag Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
Inside a Washer Repair Visit
Care Maytag Recommends for Its Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
Laundry Notes for Holly Springs, GA
Most washer calls in Holly Springs come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Georgia has no appliance repair license; the Secretary of State's construction-related licensing boards cover conditioned air, electrical, plumbing, low voltage, utility and residential/general contractors, with no separate appliance category. Source: Georgia Licensing Boards (Georgia Secretary of State)
In Georgia, you can check a license with the Georgia Secretary of State Licensing Division License Lookup or report a problem to the Georgia Attorney General's Consumer Protection Division.
Questions to Ask a Holly Springs Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Holly Springs, GA
Is my Maytag washer worth repairing?
Is this Maytag customer service?
Why is my washer leaking?
Why does my front-load washer smell?
Related Repair Pages for Holly Springs
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.