A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Old Greenwich list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Old Greenwich CT
40 repair companies serve Old Greenwich from within 30 miles. Other nearby bases include Stamford (9), Norwalk (7), and Huntington (5). Distances run up to about 14 miles. No company within 90 miles of Old Greenwich mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is E.T Appliance Repair Service Connecticut, about 1.9 miles away. The 30 rated companies in range average 4.2 stars.
Companies are shown by relevance and distance from Old Greenwich. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Maytag | 0 |
|---|---|
| Three nearest companies, miles away | 1.9, 2.4, 2.5 |
| Open on Saturdays (per listing) | 32 |
| Repair companies inside 30 miles | 60 |
| Mention washer work | 16 |
| With 4.5+ stars and at least 10 reviews | 15 |
Closest matches for Old Greenwich: 3rd Person Appliance Repair (2.7 miles away, based in Stamford, 5.0 stars from 386 reviews, lists Saturday hours); Mr. Appliance of Fairfield CT (6.8 miles away, based in Stamford, 4.9 stars from 1,199 reviews, lists Saturday hours); Mr. Appliance of Scarsdale-Mount Kisco-Brewster (10.8 miles away, based in White Plains, 4.6 stars from 721 reviews, lists Saturday hours); American Service (12.9 miles away, based in Huntington, 4.9 stars from 85 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Maytag Washer Symptoms and First Checks
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
When to Call for Maytag Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
What a Washing Machine Technician Checks
Owner Care for Maytag Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Old Greenwich
Most washer calls in Old Greenwich come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Connecticut's Department of Consumer Protection does not list a separate appliance repair license; work on gas piping, approved gas appliances and refrigeration systems falls under its heating, piping and cooling license categories. Source: Heating Piping and Cooling License Types and Scope of Work (CT Department of Consumer Protection)
In Connecticut, you can check a license with the CT Department of Consumer Protection: Verify a License or report a problem to the Connecticut Department of Consumer Protection.
Questions to Ask a Old Greenwich Washer Technician
- How often do you repair Maytag washers, and how quickly can you get parts?
- Do you work on front-load and top-load washers, or only one type?
- Will you check the drain pump filter and drain hose before replacing the pump?
Maytag Washer Repair FAQs: Old Greenwich, CT
Do you work for Maytag?
Where is the water under my washer coming from?
Why won't my washer spin?
Which Old Greenwich technicians work on Maytag?
More Washing Machine Repair in Old Greenwich, CT
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Old Greenwich technician bring the right parts.