A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Maytag Washer Repair Near Rogers
22 repair companies serve Rogers from within 30 miles. 2 list an address in Rogers, and the rest are spread across Springdale (8), Fayetteville (6), and Bella Vista (2). Distances run up to about 23 miles. None of the repair companies near Rogers name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Sears Appliance Repair is the nearest, roughly 1.9 miles from Rogers. Rated companies nearby average 4.0 stars across 18 businesses.
Companies are shown by relevance and distance from Rogers. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Rated 4.5 stars or higher (10+ reviews) | 5 |
|---|---|
| Mention Maytag | 0 |
| Listing Saturday hours | 11 |
| Three nearest companies, miles away | 1.9, 4.8, 7.3 |
| Mention washer work | 6 |
| Repair companies inside 30 miles | 22 |
The leading options for Rogers are Mr. Appliance of Springdale and Rogers (4.8 miles away, based in Bentonville, 4.9 stars from 782 reviews); Mr. Appliance of Fayetteville, AR (17.0 miles away, based in Fayetteville, 4.8 stars from 492 reviews); Sears Appliance Repair (1.9 miles away, 4.5 stars from 115 reviews, lists Saturday hours); Gliedt Appliance (9.6 miles away, based in Springdale, 4.4 stars from 174 reviews).
Maytag Washer Lines and Features
What Makes Maytag Washer Repairs Different
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Common Maytag Washer Problems
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
Maytag Washer Problems Worth a Service Call
- Loud banging, shaking or walking during the spin
- Washer will not start or the lid or door stays locked
- Burning smell or a motor that hums without turning
Inside a Washer Repair Visit
Owner Care for Maytag Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Rogers
Most washer calls in Rogers come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Arkansas has no separate appliance repair license, and household appliances are listed as exempt equipment under the state HVACR licensing law, though exempt work must still meet HVACR rules and any local permit and inspection requirements. Source: Arkansas HVAC/R Statutes 2025, A.C.A. ยง 17-33-102 (Arkansas Department of Labor and Licensing)
In Arkansas, you can check a license with the Arkansas Department of Health Protective Health Codes licensee search (plumbing and gas fitter licenses) or report a problem to the Arkansas Attorney General, Consumer Protection Division.
Questions to Ask a Rogers Washer Technician
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Maytag Washer Repair FAQs: Rogers, AR
Why won't my washer spin?
Which Rogers technicians work on Maytag?
Why does my front-load washer smell?
Why is my washer leaking?
Other Washer Repair in Rogers
Maytag Washer Repair Near Rogers
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.