GE owners in Enoch usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Washer Technicians, Enoch UT
8 repair companies serve Enoch from within 60 miles. Other nearby bases include St. George (4), Cedar City (2), and Hurricane (1). The farthest listed company is about 55 miles out. None of the repair companies near Enoch name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Royal Appliance, around 3.2 miles out. The 8 rated companies in range average 4.4 stars. Because the nearest shops are farther out, ask each company whether Enoch is inside its regular service area.
Companies are shown by relevance and distance from Enoch. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 2 |
|---|---|
| Mention GE | 0 |
| Three nearest companies, miles away | 3.2, 5.2, 42.6 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Open on Saturdays (per listing) | 4 |
| Repair companies inside 60 miles | 8 |
First up for Enoch: Mr. Appliance of St. George (54.2 miles away, based in St. George, 4.8 stars from 1,430 reviews, lists Saturday hours); ALAN'S Appliance Service (5.2 miles away, based in Cedar City, 4.4 stars from 48 reviews); Royal Appliance (3.2 miles away, based in Cedar City, 4.3 stars from 29 reviews); Appliance Repair Center (42.6 miles away, based in Hurricane, 4.9 stars from 74 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines and Features
What a GE Washer Technician Deals With
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
GE Washer Error Codes
| Code | What it means |
|---|---|
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
GE Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- Burning smell or a motor that hums without turning
- An error code on the display
What Gets Fixed on a Enoch Washer Call
Owner Care for GE Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
- Any error code shown on the display
Around Enoch
Most washer calls in Enoch come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Enoch
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
GE Washer Repair FAQs: Enoch, UT
Why does my front-load washer smell?
How do I find a technician who knows GE washers?
Where is the water under my washer coming from?
Is my GE washer worth repairing?
More Washing Machine Repair in Enoch, UT
More GE Washer Repair Pages Nearby
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Enoch technician bring the right parts.