Most GE washer repairs in Copperas Cove involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Copperas Cove list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Washer Repair Near Copperas Cove
Within 30 miles of Copperas Cove there are 19 appliance repair companies in our data. 1 of them are based in Copperas Cove itself, and other nearby bases include Killeen (8), Temple (3), and Harker Heights (2). The farthest listed company is about 29 miles out. Of those, 1 mentions GE by name. Nearest on the list: The Appliance Clinic, around 0.5 miles out. Rated companies nearby average 4.0 stars across 17 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 7 |
|---|---|
| Companies within 30 miles | 19 |
| With 4.5+ stars and at least 10 reviews | 5 |
| Distance to the three closest (mi) | 0.5, 7.8, 9.7 |
| Mention GE | 1 |
| Open on Saturdays (per listing) | 10 |
Closest matches for Copperas Cove: Searle’s Washer & Dryer Repair (27.8 miles away, based in Temple, 4.9 stars from 157 reviews, lists Saturday hours); Sears Appliance Repair (11.8 miles away, based in Killeen, 4.2 stars from 321 reviews, lists Saturday hours); CSM Electronics (12.6 miles away, based in Killeen, 4.1 stars from 55 reviews); Sears Appliance Repair (24.2 miles away, based in Gatesville, 4.5 stars from 96 reviews, lists Saturday hours).
GE Washer Lines and Features
What Makes GE Washer Repairs Different
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Symptoms and First Checks
- Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Error Codes
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Washer will not spin, or clothes come out soaking wet
- Water left in the drum after the cycle
What Gets Fixed on a Copperas Cove Washer Call
Owner Care for GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Copperas Cove
Most washer calls in Copperas Cove come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Copperas Cove
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
GE Washer Repair FAQs: Copperas Cove, TX
How do I find a technician who knows GE washers?
Why does my GE washer show an error code?
Do you work for GE?
Where is the water under my washer coming from?
Other Washer Repair in Copperas Cove
GE Washer Repair Near Copperas Cove
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.