Most GE washer repairs in Burnet involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Washer Repair Near Burnet
30 repair companies serve Burnet from within 30 miles. Other nearby bases include Leander (14), Marble Falls (5), and Cedar Park (4). None of the repair companies near Burnet name GE in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Sears Appliance Repair, about 10.7 miles away. Rated companies nearby average 4.5 stars across 30 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention GE | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 18 |
| Three nearest companies, miles away | 10.7, 11.5, 11.7 |
| Listing Saturday hours | 19 |
| Mention washer work | 8 |
| Companies within 30 miles | 30 |
The leading options for Burnet are Sears Appliance Repair (10.7 miles away, based in Marble Falls, 4.6 stars from 116 reviews, lists Saturday hours); Highland Lakes Appliance Repair (13.0 miles away, based in Kingsland, 4.9 stars from 58 reviews, lists Saturday hours); Texcen Appliance Repair (27.0 miles away, based in Leander, 4.7 stars from 464 reviews); LEK APPLIANCES (24.9 miles away, based in Leander, 4.9 stars from 74 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
How GE Washers Are Built
Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Says to Check First
- Washer off balance or shaking. Remove some items from an overfilled basket or spread bunched items evenly, then make sure the washer is level. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
GE Washer Error Codes
| Code | What it means |
|---|---|
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
When to Call for GE Washer Repair
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
- An error code on the display
What a Washing Machine Technician Checks
Owner Care for GE Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Burnet, TX
Most washer calls in Burnet come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Before You Book in Burnet
- Will you check the drain pump filter and drain hose before replacing the pump?
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
GE Washer Repair FAQs: Burnet, TX
Should I repair or replace my GE washer?
Do you work for GE?
What stops a washer from spinning?
Related Repair Pages for Burnet
GE Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.