Serving Sturgis, South Dakota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

GE Washer Repair in Sturgis, SD

A local list of independent GE washing machine technicians for Sturgis and the Meade County area, plus a helpline that connects you with one.

Need GE washer repair near Sturgis?
One call reaches an independent technician near Sturgis who works on GE.
☎(866) 293-4411
✓7 companies listed for Sturgis✓Independent, not a manufacturer✓Public ratings & distances

GE owners in Sturgis usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Sturgis, with those that mention GE first, then the nearest appliance repair companies.

This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.

Who Works on GE Washers Near Sturgis

Within 60 miles of Sturgis there are 7 appliance repair companies in our data. Other nearby bases include Rapid City (5) and Spearfish (2). Distances run up to about 29 miles. T & W Appliance LLC is the nearest, roughly 17.8 miles from Sturgis. No company within 90 miles of Sturgis mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.7 stars across 5 businesses. Because the nearest shops are farther out, ask each company whether Sturgis is inside its regular service area.

Washer & Dryer Repair
Appliance Repair Services
3620 Redwood St, Rapid City, SD 57701
28.9 mi from Sturgis
★★★★★ 4.9 (279 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
137 E Illinois St, Spearfish, SD 57783
18.6 mi from Sturgis
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1111 E North St, Rapid City, SD 57701
27.0 mi from Sturgis
Mentions washersSaturday hours
Appliance Repair
K&D Appliance Service
3405 Edwards St, Rapid City, SD 57703
27.4 mi from Sturgis
★★★★★ 4.8 (1,304 reviews)
Appliance Repair
T & W Appliance LLC
947 E Colorado Blvd, Spearfish, SD 57783
17.8 mi from Sturgis
★★★★½ 4.7 (28 reviews)
Appliance Repair
Appliances & Electronics Repair Lab
901 Gainsboro Dr, Rapid City, SD 57701
23.4 mi from Sturgis
★★★★½ 4.7 (50 reviews)
Saturday hours
Appliance Repair
Brink Inc. Hobart Sales & Service
1212 Oregon St, Rapid City, SD 57701
28.9 mi from Sturgis
★★★★½ 4.4 (5 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

By the numbers: technicians near Sturgis
Mention GE0
Listing Saturday hours3
Mention washer work3
Distance to the three closest (mi)17.8, 18.6, 23.4
Companies within 60 miles7
Rated 4.5 stars or higher (10+ reviews)4

Closest matches for Sturgis: Appliance Repair Services (28.9 miles away, based in Rapid City, 4.9 stars from 279 reviews); Sears Appliance Repair (18.6 miles away, based in Spearfish, lists Saturday hours); Sears Appliance Repair (27.0 miles away, based in Rapid City, lists Saturday hours); K&D Appliance Service (27.4 miles away, based in Rapid City, 4.8 stars from 1,304 reviews).

⚡ One call to a GE washer technician near you
☎(866) 293-4411

GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.

GE Washer Lines and Features

GE Profile top load seriesGE Profile top load washers offered in both agitator and impeller versions with adaptive Smarter Wash controls.
GE Profile UltraFast ComboAn all-in-one ventless washer and dryer that moves a load from washing to drying in the same drum on a standard 120V outlet.

How GE Washers Are Built

Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting

GE Washer Symptoms and First Checks

What GE Washer Codes Mean

CodeWhat it means
FEWater has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator
LIdThe cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
dE / E2The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator

Signs Your GE Washer Needs a Technician

  • An error code on the display
  • Loud banging, shaking or walking during the spin
  • Musty or mildew smell from the drum or door seal

What a Washing Machine Technician Checks

Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.

Owner Care for GE Washers

Brand guides: GE Washer Not Draining or Spinning: What to Check.

What GE Washer Repairs Cost

A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Getting Ready for the Repair

  • What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
  • Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
  • Where the washer drains (standpipe or laundry sink)

Local Notes for Sturgis

Most washer calls in Sturgis come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

The South Dakota Plumbing Commission issues Appliance Contractor and Appliance Installer licenses as plumbing specialty licenses; official pages reviewed did not spell out which appliance work they cover or whether repair alone requires one. Source: South Dakota Plumbing Commission - Licensing

In South Dakota, you can check a license with the South Dakota Plumbing Commission lists of licensees (specialty licensees, including appliance) or report a problem to the South Dakota Attorney General, Division of Consumer Protection.

Before You Book in Sturgis

  • Do you work on front-load and top-load washers, or only one type?
  • How often do you repair GE washers, and how quickly can you get parts?
  • If a part has to be ordered, how soon can you come back to finish?

GE Washer Repair FAQs: Sturgis, SD

Is my GE washer worth repairing?
Compare the repair quote with the price of a comparable new washer and consider its age. Lid switches, door locks, inlet valves, belts and drain pumps are modest repairs on a washer that is otherwise sound. Our repair-cost guide shows published ranges.
Is this GE customer service?
No. We are an independent directory and are not affiliated with GE. The companies listed are independent technicians. For manufacturer coverage questions, contact GE directly.
Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

Related Repair Pages for Sturgis

GE Washer Repair in Nearby Cities

Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Sturgis technician bring the right parts.

Call to reach an independent GE washer tech
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech