A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Redmond list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Washer Repair Near Redmond
13 repair companies serve Redmond from within 30 miles. 2 of them are based in Redmond itself, and the rest are spread across Bend (8), Prineville (2), and Madras (1). Distances run up to about 25 miles. The closest is Sears Appliance Repair, about 0.9 miles away. 1 lists GE specifically. Across 11 rated companies, the average public rating is 4.3 stars.
Companies are shown by relevance and distance from Redmond. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Companies within 30 miles | 13 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 4 |
| Three nearest companies, miles away | 0.9, 2.1, 11.1 |
| Name washers or washing machines in their listing | 7 |
| Open on Saturdays (per listing) | 7 |
| Mention GE | 1 |
First up for Redmond: Polished Appliance Repair - Serving Central Oregon, Medford, and Eugene (2.1 miles away, 4.5 stars from 261 reviews); CORTech Services LLC. (16.2 miles away, based in Bend, 4.6 stars from 297 reviews); Oregon Appliance Repair (15.4 miles away, based in Bend, 3.9 stars from 369 reviews, lists Saturday hours); Sears Appliance Repair (0.9 miles away, 4.2 stars from 6 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
What Makes GE Washer Repairs Different
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Says to Check First
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
Signs Your GE Washer Needs a Technician
- Musty or mildew smell from the drum or door seal
- Washer will not start or the lid or door stays locked
- Water on the floor under or in front of the washer
How a Washer Service Call Usually Goes in Redmond
Keeping a GE Washer Running
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Redmond
Most washer calls in Redmond come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.
Before You Book in Redmond
- Will you check the drain pump filter and drain hose before replacing the pump?
- If a part has to be ordered, how soon can you come back to finish?
- How often do you repair GE washers, and how quickly can you get parts?
GE Washer Repair FAQs: Redmond, OR
Which Redmond technicians work on GE?
Where is the water under my washer coming from?
Is this GE customer service?
What stops a washer from spinning?
More Washing Machine Repair in Redmond, OR
More GE Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.