Most GE washer repairs in Swartz Creek involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Swartz Creek list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Independent GE Washer Technicians, Swartz Creek MI
Within 30 miles of Swartz Creek there are 25 appliance repair companies in our data. The rest are spread across Flint (4), Waterford Township (3), and Flushing (2). Distances run up to about 30 miles. Nearest on the list: Sears Appliance Repair, around 3.1 miles out. No company within 90 miles of Swartz Creek mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 24 rated companies, the average public rating is 4.2 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 13 |
|---|---|
| Distance to the three closest (mi) | 3.1, 7.0, 7.3 |
| With 4.5+ stars and at least 10 reviews | 12 |
| Mention washer work | 11 |
| Mention GE | 0 |
| Companies within 30 miles | 25 |
First up for Swartz Creek: Michigan Appliance Repair (23.2 miles away, based in Hartland, 4.8 stars from 863 reviews, lists Saturday hours); Sears Appliance Repair (3.1 miles away, based in Flint, 4.6 stars from 152 reviews, lists Saturday hours); Sears Appliance Repair (11.5 miles away, based in Fenton, 4.6 stars from 115 reviews, lists Saturday hours); Kearsley Appliance Repair (7.6 miles away, based in Flint, 4.8 stars from 697 reviews).
GE Washer Lines Technicians Work On
What Makes GE Washer Repairs Different
Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Common GE Washer Problems
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer off balance or shaking. Remove some items from an overfilled basket or spread bunched items evenly, then make sure the washer is level. Source: GE Appliances - Frequently Asked Questions About GE Washers
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
When to Call for GE Washer Repair
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Swartz Creek
Care GE Recommends for Its Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
Around Swartz Creek
Most washer calls in Swartz Creek come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Swartz Creek
- Will you check the drain pump filter and drain hose before replacing the pump?
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
GE Washer Repair FAQs: Swartz Creek, MI
Why does my front-load washer smell?
Why is my washer leaking?
What stops a washer from spinning?
How do I find a technician who knows GE washers?
Other Washer Repair in Swartz Creek
GE Washer Repair in Nearby Cities
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.