GE owners in Medford usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Medford, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Medford
We found 40 appliance repair companies within 30 miles of Medford. 2 list an address in Medford, and the rest are spread across Boston (10), Cambridge (6), and Malden (4). The farthest listed company is about 6 miles out. No company within 90 miles of Medford mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Cedar Appliance Co., around 1.5 miles out. Across 34 rated companies, the average public rating is 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 44 |
|---|---|
| Name washers or washing machines in their listing | 15 |
| Rated 4.5 stars or higher (10+ reviews) | 29 |
| Mention GE | 0 |
| Distance to the three closest (mi) | 1.5, 1.9, 2.3 |
| Appliance repair companies in range (30 mi) | 60 |
At the top of the Medford list: UltraFix Appliance Repair (2.8 miles away, based in Cambridge, 4.8 stars from 1,527 reviews, lists Saturday hours); Master of Appliances Repair (3.2 miles away, based in Malden, 4.9 stars from 288 reviews); Sears Appliance Repair (4.2 miles away, based in Cambridge, 4.5 stars from 604 reviews, lists Saturday hours); Boston & Cambridge Appliance Repair, Inc. (4.2 miles away, based in Stoneham, 4.3 stars from 56 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines and Features
What a GE Washer Technician Deals With
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
Common GE Washer Problems
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
Signs Your GE Washer Needs a Technician
- Burning smell or a motor that hums without turning
- An error code on the display
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Medford Washer Call
Care GE Recommends for Its Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Medford Owners Should Know
Most washer calls in Medford come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Massachusetts does not issue a separate appliance repair license; running fuel gas piping to appliances and installing their vent piping is gas fitting work that requires a license from the Board of State Examiners of Plumbers and Gas Fitters. Source: Plumbers and gas fitters consumer fact sheet (Mass.gov)
In Massachusetts, you can check a license with the Massachusetts Division of Occupational Licensure eLIPSE license verification portal or report a problem to the Massachusetts Attorney General's Office, Consumer Advocacy and Response Division.
Questions to Ask a Medford Washer Technician
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Washer Repair FAQs: Medford, MA
What should I do about a GE error code?
Where is the water under my washer coming from?
Should I repair or replace my GE washer?
How do I get rid of a washer mildew smell?
Other Washer Repair in Medford
More GE Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.